Haven't tried to use CPU/NB Skews, same as I haven't with NB GTL and tREF.Originally Posted by A-Grey
Your in the right strap and your running at right DDR speed to start experiencing random failures.
Try with Prime95 Blend mode and look where it fails. Is it always in small FFT's or is it in Large FFT's. Is it always the same core. Or is it just randomly like I have at 8 X 465MHz and DDR 1239MHz.
Did you use the CPU and NB Clock Skew?
About CPU - it's not its fault for 100%.
I've used to run my rig on [IP35-PRO]:
FSB = 450
MEM = 540
vCPU = 1.375
vDDR = 2.2
Timings = 5-5-5-15
And on Rampage Formula I added
LLC = Enabled
A/B Skews = Advance +300
All other settings on stock/default/auto settings and haven't got any stability problem back before when I was using IP35-PRO and now when I'm using Rampage Formula.
IMO the problem is with my RAM, I'm not sure can it be clocked so high.
Anyway I'm kinda curious why my mobo can run ram at 540 on stock vMCH but to get 600 I need to raise it by 0.2v.
Reply With Quote
Bookmarks