Post questions and information here
Thus far i know the Patriot XBLK has these awsome chip's on it,if i could get the help of other ddr2 users to help me build the list up,please post model and maker of the ram u have with fatty d9's on it that would be awsome.
2x512MB kit list
CORSAIR XMS2 1GB (2 x 512MB) 240-Pin DDR2 SDRAM...
I have prepared a list of most of the DDR2 memory availabe nowadays.
The overclocking modules will be marked later with RED color, to have more clear visibility which modules all you Xtreme people should search.
If somebody has doubts about other modules or have some information about other...
Hello Xtreme ppl...:D
I tried to write down every ddr2 module comes out and as much specs as i can in order to help you and me of course..:DThe list iw will be fullfiled every time i have something new...so i want your help too for new memory and new chips
If anyone can help to fill the...
I see many people still can`t decide what memory to choose for their C2D rigs and what performance should they expect from desired kit. XbitLabs made pretty good review on almost all memory combinations. Article is very usefull for both high-end users and those on a budget cos it has tests from...
Guys I need your expertise I need good overclocking memory 8GB total for my EVGA P55 SLI LE E653 that will overlock at rated speed - 200*8 = 1600MHz Im runnig a i5 750 at 4 ghz. with 4GB ram and I keep running low on memory when playing games. Thanks in advance
Now choose a memory to participate in the MOA Class "B".
May suggest that the take of the following:
Looking for the best price/performance ram for this board. Will be pairing it with either a 2600k or 3570k
Hi hopefully this is the proper part of the forum to post this into
First I have to confess that I build my last pc over 6 years ago and I since then did not read up or follow any computer magazines or test. You could easy say that Im a noob. BUT I have a once in a lifetime opportunity to build...
I have the system you see in the signature.
Currently I have the x3380 CPU at 9.5x444mhz and it can prime95 for 10 hours without any problems.
However this is with my Corsair XMS3 DHX 1600mhz C9 @ 444*2.66 and not proper quad band...That's not even on 1200mhz sticks that should be...
Hi guys, I got a guts feeling that IC is the exact same on:
CMSO16GX3M2A1600C11, Corsair Value Select 2 x 8 GB PC12800 11-11-11-28
CMSX16GX3M2A1866C10, Corsair Vengeance 2 x 8 GB PC15000 10-11-10-30
For that reason I would like to flash my Value Select, to the faster Vengeance SPD,...
Part of Mine, First step is recognizing I have a problem...probably should sell some off soon before the house is full...
Let's see what you got!
Hey guys, I'm getting desperate trying to keep my ASUS Z7S-WS alive. Kingston no longer has replacement memory and I'm down to my last two sticks. They gave me a nice check for $140 in exchange for the last kit I sent in, but I can't plug that check into my board.
I've exhausted my Google-fu and...
looking to get some new ram 2x4gb sticks.
i have now ram made for 890 chipset CH4 Extreme from OCZ (cas 8) 888 24 (2000mhz)works damm good.
with these newer boards and FX 8350 Cpu's what the best i can get for AMD fastest timmings.
money is not a problem for when you want something...
Question for you memory experts - How close to gddr5 will ddr4 get in terms of bandwidth and latency? Will it be able to fix the gap for integrated gpu's memory limitations when it becomes available?
I'm having trouble finding out exactly what makes ddr3 based gddr5 much different from ddr4, and...
I assume Vishera does high IMC compared to Zambezi, what memory I should look at?
8gb is fine for me, since I run Sloow 16gb ripjaw and stil have old Gskill Eco.
On a Windows system with ECC RAM installed, how do I check / monitor the number of soft and hard ECC errors that have occurred? Are any special motherboard / chipset drivers required?
Edit: A similar question was asked here...
Hope you are all well?
I have just built the following system and need some advice
IB 3770K + Corsair H100
Asus Maximus V Gene with latest bios
8GB 1866Mhz Dominator-GT
Building a new system
i7 2600k, Asus P8P67, Dual Hd 6850, Raid Sata3 SSD
Is 8GB DDR3 1600Mhz enough ram?
Been looking in new memory lately since the current (bought as temporary) memory is bleh.
Currently have 4x 4GB Corsair Vengeance PC12800 / 1600MHz (CMZ8GX3M2A1600C9B).
What I am looking at:
OK so I work at frys and a customer was telling me that Samsung sells some 1333 dimms that clock to 2400 at like 1.550v with the 9-9-9 timings. Does anybody know about these? Id like to get a model number if possible, I think he said they were 8gb dimms.
Edit: ddr3 memory
I got 2x2GB of that Samsung 30nm Extreme Low-Voltage memory. Well, I actually have 4x2GB. But anyways, trying to get my best possible SuperPi 32m score. I can run 1333MHz, 6-6-6-18-1T, 1.5v, and get about 11:11. Then when I OC to 2133MHz, 10-10-10-24-1T, 1.65v, I get about 10:45 or so. Why is it...
I am working on upgrading my CPU, MB and RAM.
Based on my needs I figured to get the following:
MB Asrock z77 Extreme 4
RAM: 16 GB GSKILL with low CAS.
Looking around I have found these kits:
Not sure if you guys were aware but recently on Facebook a bunch of Modders/Reviewers/Forum Owners and others were invited as Friends from the owner of a Ram company called AVEXIR.
After we accepted the friend request we got a message saying we were getting Free sample of there...
F3-2400C10Q-16GTX http://www.newegg.com/Product/Product.aspx?Item=N82E16820231588 vs F3-2400C10Q-16GZH http://www.newegg.com/Product/Product.aspx?Item=N82E16820231586
Both have Timing: 10-12-12-31.
Which would you pair with a 3930k? Im not sure how good imc it has, hiwa recommended me the...
I have a G Skill 6.9.6 2000 Pi kit .... this one http://www.gskill.com/products.php?index=256 It runs great & makes 2400 @ 1.65v on my Z77 UD5H easy so would like to flash the SPD to the 2400 kit if I can find it.
This is the kit I would like to find the SPD for...
I've purchased a G.Skill F3-19200CL10Q2-64GBZHD kit located here:
Anyone have experience with this kit? I'll be using them on an ASRock Extreme 11 and 3960X. Is it reasonable to expect to get this 64 GB kit up to 2400 MHz? I know...
Do the F-die and C/D-dies OC to roughly the same speed/timings?
I've been out of the rig building for a while. In my sig I've got an old socket 775 system running only 2GB of Corsair DDR3 1800 7-7-7-20 running on Vista 64. Some games are crashing now. From what I've been seeing no one offers memory that runs at these settings anymore and I can't find this old...
There are currently 4 users browsing this forum. (3 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.