Forum: Foxconn - Quantum Force

Heya Would any of you happen to have the driver linked to in this thread: http://www.xtremesystems.org/forums/showthread.php?246401-Creative-Driver-for-WIn7&highlight=X-Fi The website that thread points to no longer exists and hence I can't download the working driver EDIT:

Hi! I hope here is still somebody who can help me out :) I recently got my hands on an 980x CPU and wanted to overclock it. My problem is that if I want to OC with a fixed multi, the Board won't change the Multi at all. For example: In BIOS: Cpu Turbo: disabled

Here are the great news :D - Foxconn Quantum Force is back with X79:

Hello guys, I have two SSDs (Plextor M5S 128Gb) + 4 WD VelociRaptor 300Gb (10.000RPM). I would like to know which sata ports should I install the two SSDs (Raid 0) to not lose speed performance in Bloodrage. What (ports) would be the most adequate to be installed? *17; Very grateful to...

http://www.ebay.com/itm/150998874304?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

I am curious on this subject. I have 2 video cards in the 2 red pcie slots. I can't used my other 2 slots due to the design of the board. Has anyone tried this? I want to use this for my bootable Sata III controller card that I currently have on my PCIE x1 slot. ...

I just updated my bios on my bloodrage to p11 from p09. After I did this windows crashes during start up every time. Some reason safemode is working fine. I am trying to install windows 7 and it crashes every time after the animation. I am getting so pist off right now. I wish I never updated this...

Can this run on the Bloodrage? I have, I believe, the lastest beta bios. I see newegg has them for $150. I am thinking of treating myself since I haven't upgraded since last xmas. Thanks in advance

Just thought i'd wish all here a very merry xmas and all the best for the new year :up:. Great little community in this quiet little corner of xs and I hope we continue to grow into 2011. Hope you all have a great day :).

Hello guys. I'm going back to the x58 platform, and would like to know what the best bios to use in Bloodrage? And from official bios which has compatibility with cpu's i7-980/990x? I saw many people using the G44, do you recommend? Thank you!

When i overclock my cpu to 3.2 or anything else for that matter, after awhile windows will only be able to use 4gbs of ram. And the bios will also see only 4gb being used. I have tried pushing the voltage settings up alot more except for ram. I have my ram voltage at 1.65 but wont push it anymore...

Hello! I just got 3x4 GB memory upgrade but my G21 BIOS won't work with them :'( QF website is closed and I cannot google working link to newer beta BIOS. As I know, the 12gb bug was fixed in G24 BIOS so could anyone email me G24 BIOS or newer one to artem_hvostov@mail.ru

Hi all, I wanted to see if anyone seen an issue I have with an old Foxconn P45A motherboard. I had unplugged the power cord from the machine for a couple days and when I plugged/powered on, the BIOS had lost its settings. I figured the mobo battery was dead and replaced it with a new one. Problem...

I am hoping one of the reps will be around to see this and possibly help me out. I am trying to get a replacement IO Shield for my Bloodrage board. I was recently in the process of stripping down my rig and have lost the IO Shield for it. I have contacted the main foxconn support who advised...

The board came with P10 bios. Overclocking seems difficult on this board compared to my older boards, I heard these boards are good OCers but my board isnt overclocking that well. I was able to OC my core i7 920 d0 on an evga ages ago very well and achieved 4ghz with ease. But this board always...

Hi All, I hope someone can help with setting up AHCI on my Foxconn Blackops. I just added a Corsair Force Series 3. At this time all I want to do is use Everquest2 with it so I added the SSD as just another drive. It works perfectly and provides incredibly quick load times when changing zones....

Anybody know the max rpm speed of the included fan? The fan got loud at full blast. I need to buy a 40mm fan for another silent system and am deciding between a 3500 rpm fan and 5000 rpm fan.

just about to do a bit of nostalgic over clocking on my Blackops. and cant find aegis panel, and not able to find any links that work with my freind Google. Would be grateful for link or copy of file. thnx

Speedfan, hwmonitor, and hwinfo, don't show correct system and NB temps. On a fresh boot (from the system off state), the temps show -128C in these programs. When I reboot, then it correctly shows the temps as they are during the boot. But they don't update again unless I reboot the system. ...

Hi there, since i can't get my p400 raid controller to work i ran into an other issue. i have 3x4gb mushkin blackline ddr3 1600mhz ram and no matter to what i set the memory multiplier to, it always stays at the same clock speeds. Another odd thing is that i have to leave trfc at 86...

Hi Folks, the problem is the following: Built myself a new workstation with a flaming blade gti,12GB Ram, Xeon W3565. I wanted to use my p400 raid controller with my 4 sas disks. On boot up the controller is recognized, but after intializing just a blinking cursor is on the screen. I...

A long time ago I wrote some not so nice things about BloodRage add-on soundcard (Sonar X-Fi). Recent events (some problems with crackles and Auzentech Bravura) forced me to try it. I said to myself, well its better than nothing, right? Well, its much better than nothing, if used properly. :D ...

Update: I figured it out (feel free to delete, mods). For future reference, for those who are searching: Download the P11 bios, install using FOX live update. On reboot, go to bios, select load optimized defaults, and reboot again. This was the easiest way I could find. Hello, I...