Forum: AMD Information And Support

My question is which boards can turn off a single core in each module. Interested in trying this but my Sabertooth 990FX only allows module disable. Bios only has settings for disabling cores 3,4 5,6 7,8 in pairs. Is this a feature of the ROG boards such as CHV only ?

AMD is luring me in with the rebates/cash-back on the Dozers. I Need a solid really good value for money motherboard and cooler for this plan however and I am a bit stuck on these items in particular. Already have some of that yummy Samsung Green 30nm on the way memory wise that I got at a good...

I'm trying to fix a machine for a friend. I get a feeling it never actually worked right. It's a Shuttle XPC SA76G2, which from what I've gathered, supports CPUs up to 105W TDP and has a 250W power supply. The Phenom X4 9950BE (Agena) is 125W TDP with 1.30V VID. The BIOS does not have...

Moved this thread to AMD for lack of response, Mods feel free to delete this!

hey guys i got this Phenom II X2 550 ( not black edition version ) and i was wandering if it possible to unlock it ??? if yes can u please tell me how here is my info the board is GA-MA785GM-US2H Bios: GA-MA785GM-US2H F11 ??

Having a very odd problem here. I'm trying to OC my cpu (Obviously) and whilst I can change the multiplier in AMD OverDrive very easily (In fact I hit 3.8Ghz stock voltage linpack stable and 4Ghz @ 1.4V - didn't get a chance to go higher before hitting this odd issue). The problem I'm having...

Hello everyone, first sorry for my English but I am using the google translator. I have a 140 and a sempron asus motherboard m5a99x, I would like to mute x2 athlon II 440. The bios recognizes my processor but when I start windows 7 freezes. Do not know if that will put him over voltage. I...

Hello all, new to the forum but not new to computers. Been building them for years now and wanting to overclock my latest. I've got a Phenom II 965BE C3 on the ASUS Crosshair Formula IV and I really can't seem to get stable overclocks. I have had it up to 3.8Ghz which seemed stable in almost...

Hi! I'm assembling new rig for a friend of mine. The main parts are: CPU AMD X4 II630 Mobo Asus M4A785TD-V EVO PSU OCZ StealthXsteam 600W Memory Geil 2GB 1333MHz Ultra DDR3

Since I don't have the hardware to be xtreme, I figure this is the place to post... Anyways, I've got a AMD Phenom II x4 3.5Ghz Black Edition 970 I wanted to play around with overclocking some, so I downloaded..AMD Overdrive, and on level 10, I can only get up to 3.77GHZ. I ran the Auto...

Hey fellas, I need to OC this cpu asap. I've had it for awhile now and want to see if I can get it to 3.0Ghz... I haven't tried overclocking before but I want to give it a shot and hoping that you guys could give me a couple pointers. Hardware: Mobo: Asus M3A32-MVP CPU: Phenom 9500 AM2+...

Subject combination does not post. It started out with one stick posting and other not posting at all. With the working stick, I was able to play in bios, boot OS. Seemed to work fine. Then I started getting freezes while in BIOS which slowly progressed into perpetual blinking of the dram_led. It...

Hey guys, I'm building a little machine for my nephew and wanna know what's the absolute best dual core amd cpu out there for this mobo? Yes I intend to overclock it w/ stable 24/7 settings. Setup: Amd CPU??? - DFI NF4 SLI - 2 x 8800 GT - Sandisk 30Gb SSD + Seagate 640Mb; - 2Gb of...

Okay for all of you Xtreme overclockers....didn't know where to post this as this is going to be grandma's cookie and milk mild. So me where to put it so I won't feel so noobish! :shrug: As this build has been running for a few days ( http://www.xtremesystems.org/forums/showthread.php?t=254446...

I have both on the Gigabyte 890fx UD5, and I'm wondering which one I should really worry about when overclocking. :P

Hey guys, I got some throttling problems with my CPU... I've unlocked the remaining 2Cores fine and it runs really stable @Stock Voltage. But when the temperature hits 52 degrees it starts reducing the frequency to something like 1Ghz?! (temp messured with lm-sensors under linux as coretemp...

i'm planning to go for AM2+ board (from AM3 :D) and looking to buy some fancy ddr2 1200 ram. but usually they are high voltage stuff. so i'd like to know how much of v i can give on IMC to not burn it and this would also clear out my "chose of ram" problem. thx in advice! :)

hello~ lets see... my problem began when the northbridge chip died on me. I heard it was quiet frequent in this mobo. using the warranty, i was able to get a replacement for free from MSI. I made a mistake and sent the mobo with 8mb bios chip so I had to buy one off the ebay again. when the mobo...

Help the AMD noob, this will be running 24/7 and probably overclocked of course. AMD Athlon II X4 620 Propus 2.6GHz AMD Phenom 9850 2.5GHz AMD Athlon II X3 440 Rana 3.0GHz All seem close in price, witch one will perform best running SMP :confused:

When I adjust the multiplier in the bios, save and reboot, the settings have not saved and cannot save. I did although increase the FSB from 200 to 212.5 and this is as much as I can go for stable OC. This problem has been like this since I've bought it. Recently I replaced four failed capacitors...

so which should i run ganged or unganged? im using a phenom II x2 550 and a MA770T-UD3P and g.skill ripjaws DDR3-1600 cl9. im currently running my memory at 1600 8-8-8-24 and unganged.

Hi folks! Quick question for those who ever try'd to slap a AM2+ CPU into this particular MoBo - did it work'd? M2N4-SLI has a nForce 500 SLI chipset which basically is a nForce 4 SLI chipset for AM2 socket, so I guess I can kiss that dream goodbye... Anyway's, just asking if anybody try'd this.

Hi, I recently took my systme apart for a good clean forgotting taking out the processor would mess up my settings, when i booted after putting it back together, it wouldn't stay on. So I took the battery out and RAM and booted again which worked but everytime i change my FSB back to 166, it...