Quote Originally Posted by kuebk View Post
Hmm, looks like the system is stable in MemScope but Linx throws me an error.

BTW: Loaline Calibration boosts up only CPU voltage, right?
LLC locks Vin = Vout for Vcc/Vtt at voltage regulator. So you don't get droop, it compensates for drop across the reg and traces, and boosts voltage between in and out. Thats all it does really.

IF llc gives you problems, you have a PSU which can't handle the extra stress, or a voltage reg on your board that can't handle it.

Linpack errors are usually GTL / DRAM clock skew related. Under heavy load that Linpack creates you experience greater clock shift, and jitter and if it is too much shift / jitter it'll be visible in Linpack.