Forum: Liquid Cooling

Here is round 12, hope this helps Here is a little intro video: Gentle Typhoon AP-15

Our no-spill quick disconnects are now available in long-awaited black! We're starting with the most popular 13 models from the newest QD3/QD4 series. These are (RoHS-compliant) black chrome plated, rather than our usual nickel plating. Tim

Read more: http://www.ekwb.com/news/316/19/EK-first-with-GeForce-GTX-Titan-Full-Cover-water-block/ Satin finish top with original CSQ design will be available as well.

It's been a long time since I last looked at my computer and maintained my loop. A little history: Apogee GTZ on a E6300 LGA775 MCR240 radiator MCP350 pump with an Alphacool (?) top Swiftech res PT Nuke and silver killcoil Well, a bunch of while algae developed on it and my tubes. I think...

EK are releasing a new jetplate for the Supremacy. I got to run a prototype on the same setup used for the CPU block roundup and got a ~1C performance increase on my 3930K: I'll retest with the final version when it's officially released and plot the restriction curves too.

Hello Guys, I have been away from forums for quite some time, being busy to prepare for the big announcement below. Unfortunately, I won't be able to answer many questions for now, being completely buried by last minute details, but I hope that you will find the information of interest :) Press...

Today on my desk we have a VERY special beta samples from the house of Alphacool, From the outside you would think this is a normal run of the mill GPU cooler. You would be wrong... The card uses a polished stainless steel top and acetal body with copper inserts directly on the heat...

Hi guys, For days looking for the following product. But I could not find it anywhere in stock. I have two pieces of the same product available and compliant bridge.I'd be happy if you could help on the subject. Do you have any of these products? 2nd hand,copper,arcetal etc.. no problem....

EK Water Blocks and Aquatuning go separate ways. With effect from 17.05.2013, the management of Aquatuning has decided to drop all EKWB products from the webshop. In 2007 and following years Aquatuning developed many products for EK Water Blocks under license and technology agreements among...

Coming soon(ish)... These are what I have been promised - a big thanks to sponsors particularly EVGA who are loaning a Titan! Alphacool Aquacomputer Bitspower EK EVGA (Swiftech) Koolance

Hey guys. I am in the middle of a mod and am thinking about covering my copper waterblocks with vinyl as it does not really match my color scheme. I am a little concerned about trapping heat inside when I cover with the vinyl though. Does anyone have any experience with that? I want to make sure...

Okay so ive decided that im retarded and need some help with this problem. I took apart my mobo block to clean it. When I took it apart I took the orings out. I tried to put them back in but found that they were too long now. So I purchased new orings for my block from EK. Fast forward to...

Hi everyone I have 3 units available in universal bridge block and bridge.I think rx360 cooling with them, I wonder how it can performance? VRM heating can be a problem?

Hey guys. I was looking for some input on possible steps I could take to improve the performance of my water loop. What I have is a Crosshair V with an FX8320. the system is installed into a 4U rackmount case so due to space constraints I was limited as far as components however I chose a very...

The full detailed 5 page article can be found on my website. Here is a summary: The MPS 400 is the first flow rate sensor for water cooled PC's that uses a differential pressure sensor that has been integrated into a single silicon part. The advantage of such a design is that there are no...

Hello~ I'm sure you guys get a ton of newbs here, but bare with me if you would please! (Is that even the right usage of bare? idk!?) I've signed up for these forums, cause it seamed every google search I did found me some good information located here. pre-warning: I'm a performance...

I just got my phobya and EK rad in today. These use M3 (metric) screws unlike other rads i've had that use 6-32 (standard) screws. I normally use my wire strippers that are able to cut 6-32 screws down to the size I need. But not I have these darn metric screws and can't seem to find any cutters...

I was interested in adding a TEC to my watercooling loop. Now, here is the thing. I don't want to have to worry about condensation so I was thinking of using a small 80 watt TEC. I know this will not be a concern for condensation UNDER LOAD but the question is how many watts would an FX8320...

It's gonna be my son and I's first water cooling rig. I looked on frozencpu and there's quite a few. I'm used to using AS5 and MX2 for all my air cooled rigs. What's the latest and greatest? Thanx.

Hey guys tomorrow i will receive 3 waterblocks not full cover the new EK universal that uses the triple SLI bridge also this is my system today the only thing that may confuse cauz its at the back is the pump out goes to rad to the right tube ok ? now i wanna cut less as posible and...

I'm trying to picture this in my head and I'm hoping someone can explain it. I've always used clear or transparent tubes so I can actually see where the air bubbles are when I'm filling the system. I like how the black tubes look but how do you bleed it? There's no way to see where the bubbles...