Quote Originally Posted by kuebk View Post
Haven't tried to use CPU/NB Skews, same as I haven't with NB GTL and tREF.

About CPU - it's not its fault for 100%.
I've used to run my rig on [IP35-PRO]:
FSB = 450
MEM = 540
vCPU = 1.375
vDDR = 2.2
Timings = 5-5-5-15

And on Rampage Formula I added
LLC = Enabled
A/B Skews = Advance +300

All other settings on stock/default/auto settings and haven't got any stability problem back before when I was using IP35-PRO and now when I'm using Rampage Formula.

IMO the problem is with my RAM, I'm not sure can it be clocked so high.

Anyway I'm kinda curious why my mobo can run ram at 540 on stock vMCH but to get 600 I need to raise it by 0.2v.
I use CPU Clock Skew Delay 200ps and NB Clock Skew Delay 100ps. This lets me run stable with 1.33V for North Bridge Voltage in the BIOS. Without these delays it isn't possible for me to get it stable with that low voltage. Maybe with my Quad it would be impossible to have that stable without the delays.

DRAM CLK on Channel A/B is on Auto.