Quote Originally Posted by Hondacity View Post
wait till you see my triple sli and k350 in one loop, with one pump and one rad..and ultra silent

i hate photobucket..i cant upload the good stuff...anyways this just finished today

I hate you.


But seriously that looks like the bomb!! I have actually considered going back to SLI or CF just for looks since my 22" would benefit from it.

As far as blocks go, if you will be running a CPU only loop then any will get the job done, 2-3 degrees is not going to get you an extra 300Mhz out of a chip. If you are doing a CPU/GPU loop then stay away from the restrictive blocks like the Koolance 350, EK Supreme, etc.. If this is your first time water cooling and I hate to say this, go with the GTZ, easy to mount or the D-Tek V2 with the Pro mount. I can't recommend the Enzotech for the I7 (I do own it) because I do not like the 1366 adapter, it will not allow you to remove the chip once the adapter has been installed. I am personally using the Cuplex DI, but I use my own mount using a backplate, some 6-32 screws and thumb nuts with springs to mount the block. It's simple, easy to use and will work with any block except the Enzotech.