Quote Originally Posted by Leeghoofd View Post

I'm redoing the swiftech GTZ as I've noticed that one screw doesn't tighten down 100% so it might gain a little...
This is a critical issue. Please email me your address at gabe@swiftech.com for a replacement backplate.

Optimum performance with the GTZ will be obtained when the following thermal grease imprint can be observed; this is the type of imprint I had for my review. Look at the center. All the grease has been squished out showing and elongated pattern. If you see grease in the center area like you see on the edges, then you have a poor mount.