Results 1 to 25 of 7801

Guide Thread

Thread Tools
Search Thread
- Advanced Search
Rate This Thread
- Current Rating
- Excellent
- Good
- Average
- Bad
- Terrible
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

02-01-2008, 10:27 PM #11
BassKozz

View Profile

View Forum Posts
Registered User

Join Date

Oct 2005

Posts

48
Originally Posted by jtf2

DO NOT FIRE THAT COMPUTER UP!!!
you need to have rubber washers on the backside of the the mb,to go along iwth the steel washers. you could be kissing goodbye your board.

Originally Posted by Ace-a-Rue

i can't tell...did you use a rubber bushing between the galvanized washer or a felt bushing on the bottom of the motherboard?...if not, do not power the board on until you do.

The board hasn't been fired up yet... Thank goodness I posted these pic's... but to be honest, I don't know if the backside is rubber or not, I think it is...
Here are some pic's that will hopefully clear this up...

(Click to view LARGEer)

So am I safe ?

Last edited by BassKozz; 02-01-2008 at 10:31 PM.

<<<My 2 new builds>>>
--=Server Rig:
Abit IP35-Pro Rev 1.1 BIOS v14 (BoltModded) || Q6600@3.3ghz (Thermalright Ultra-120 Extreme [lapped] w/ Scythe S-FLEX SFF21F) || G.Skill F2-6400CL5D-4GBPQ 2x2GB DDR2 888 5-5-5-15 || MSI NX8600GT || OS: WD Raptor 150GB || Storage: Hitachi 400GB {Eventually will add 4x750gb Raid5 for storage} || CoolerMaster Real Power Pro 750w || Antec P182
Abit IP35 Pro BIOS Settings: 370x9 | Dram 1:1 | vcore 1.315v | DDR2 1.85v | CPU VTT 1.2v | MCH 1.25v | ICH 1.05v | ICHIO 1.5v | DDR2Ref 0% | GTLREF 67%
OC: Voltage & Temps Spreadsheet

--=Everyday Rig:
Abit IP35-E BIOS v15 || E8400@3.6ghz (Arctic Cooling Freezer 7 Pro [lapped]) || Patriot Extreme Performance 2x1GB DDR2 800 4-4-4-12 || MSI NX7300LE || WD Raptor 74GB || Antec EA380 || Antec NSK4480
Abit IP35-E BIOS Settings: 400x9 | Dram 1:1 | vcore 1.2725v | DDR2 2.2v | CPU VTT 1.2v | MCH 1.25v | ICH 1.5v | GTLREF 63%
My 1st OC
Reply With Quote