Silverstone Raven

**ben549** · 03-23-2009, 01:26 AM

I’m just going to start this thread with general information that usually gets requested anyways

Silverstone Raven WORKLOG
http://www.flickr.com/photos/2734171...7615770135803/

Current hardware:
Case: Silverstone Raven RV01
CPU: Intel QX6850 (up to 4ghz)
MOBO: EVGA 790i FTW
MEM: 4GB Super Talent Project X D3-1800
GPU: Custom Case Mod EVGA 9800GX2 with EK-FC9800 GX2 Nickel-Plated
HDD: 4x 150GB WD Raptor X Drives, 2x SAMSUNG Spinpoint F1 1TB
Vista Ultimate 64bit - Raptor X’s in Raid 0
XP Pro 32bit - Raptor X’s in Raid 0
Work/Media – Samsung F1’s in Raid 1
PSU: CORSAIR CMPSU-1000HX 1000W ATX

MON: Gateway 24” LCD
Server: HP MediaSmart EX485 (4.25TB Total)

Water cooling Hardware:
Swiftech Apogee GTZ
Radiator: Feser 240 (push and pull via S-flex F’s)
Pump: Swiftech MCP655-B
Reservoir:
Tubing: Tygon 1/2" ID, 3/4" OD
Feser One - UV Black

Photography:
Camera: Nikon D300
Flash (if used): SB-900
Lenses: Tamron 17-50 f/2.8 (Pro glass), Nikon 50mm F1.8

---------------------------------------------------------------------------------
So I gutted my TJ-10 for a few reasons:
-I’m impulsive
-Dust started clogging the PSU -> Caused the system to freeze
-Ungodly amounts of dust were being sucked in through the top (and I hate cleaning with a passion)

On a lighter note the temps were actually very solid (mid 30’s at stock).

Presently, I’m stuck in a small dorm room in San Francisco and all my tools are back in Minnesota so modding might be limited.

Parts on order:
EK-BAY SPIN Reservoir - Acetal
Various Bitspower fittings

Current thoughts:
I’m hoping to replace my GPU since I had a revelation that it was pointless since I don’t play PC games. lol
I hope the room I’m in can support the new power supply.
I haven’t seen anyone with EK’s new reservoir so it should be interesting.
I’m hoping to mount the D5 directly to the Reservoir but there might not be enough clearance.
I forgot all my sleeving supplies back with my CNC so I’ll have to order some more. (Maybe something from MurderMod)

**~~b@llz0r~~** · 03-23-2009, 07:01 AM

sweet... been looking forward to a raven build

subd

**ben549** · 03-23-2009, 12:47 PM

A few quick pictures…….

I mounted an ESA controller to the Antec Mult-Station Elite in the top drive bay which has resulted in a lot of wiring…..

My current work area…….So small

**Devil_Dog** · 03-23-2009, 01:54 PM

Originally Posted by b@llz0r

sweet... been looking forward to a raven build

subd

Ditto

**Papa.Smurf** · 03-23-2009, 02:04 PM

looks like its gonna be a great build!

Sub'd

**HuffPCair** · 03-23-2009, 02:16 PM

Very cool love this case and here is the thread I started a while ago with some builds on it from some chaps on here.

http://www.xtremesystems.org/forums/...d.php?t=216373

**~~elite.ire~~** · 03-23-2009, 03:18 PM

woo, raven build

, sub'd

**theseeker** · 03-23-2009, 04:01 PM

Nice pics!

**jollyjoker** · 03-23-2009, 04:15 PM

looks good cant wait to see more

**shazza** · 03-23-2009, 04:42 PM

Yep - looks good. I like the Raven, and it will be fun to see what you do with it.

**~~ILikeCosmosS~~** · 03-23-2009, 05:15 PM

Raven is hard to watercool i want to see how this is done maybe might spark me some idea's for cosmos s build

**ben549** · 03-23-2009, 06:24 PM

I’m not sure where I should put a fill port…….any ideas? I’ve marked a few spots such as: next to the pci slots on top, on the side of the 5.25” bays, or on the plastic pointing towards the back of the case.

Originally Posted by HuffPCair

Very cool love this case and here is the thread I started a while ago with some builds on it from some chaps on here.

http://www.xtremesystems.org/forums/...d.php?t=216373

Very cool, I missed that thread when I was doing research on the raven. There are a few mods in that thread that I’ve done as well.

Originally Posted by ILikeCosmosS

Raven is hard to watercool i want to see how this is done maybe might spark me some idea's for cosmos s build

Why is it difficult to watercool?

**HuffPCair** · 03-23-2009, 06:25 PM

Can't wait to see how it comes out. Great looking pictures so far though.

**NameTaken45** · 03-23-2009, 07:05 PM

ive been dying to see a raven build. good work so far. sub'd.

**Jhors2** · 03-23-2009, 07:21 PM

I love it! One question what are those covers for the extra PCI and PCI-E slots??

**Papa.Smurf** · 03-23-2009, 07:37 PM

Were do you plan on putting the rad btw?

**Mr_Mike** · 03-23-2009, 08:23 PM

looks good cant wait to see more

**skane** · 03-24-2009, 12:28 AM

Originally Posted by Papa.Smurf

Were do you plan on putting the rad btw?

I was wondering about this as well.

**bianco** · 03-24-2009, 01:32 AM

nice project ben549.
i remember your previous build, full of nice ideas and was on a challenging case as well...
watching your log for more good stuff!

**ben549** · 03-24-2009, 02:47 AM

Updates:
Security loop installed to prevent theft
PCI-E power cables have been routed behind the motherboard tray (tray had to be trimmed)
I had a revelation about how to manage cables behind the mobo tray…..Pictures will explain everything.

Pictures coming soon (Roommate is sleeping)

Originally Posted by Jhors2

I love it! One question what are those covers for the extra PCI and PCI-E slots??

They are covers I use when I water cool to prevent any leaks from damaging the empty slots. They also work great as dust covers. I also have them covering the empty memory slots. I believe the brand I’m currently using is LampTron.

Originally Posted by Papa.Smurf

Were do you plan on putting the rad btw?

There are actually brackets that come with the case for mounting radiators to the back of the case. They are designed for triple radiators so I had to mod them…..

Originally Posted by bianco

nice project ben549.
i remember your previous build, full of nice ideas and was on a challenging case as well...
watching your log for more good stuff!

Thanks!!!! Don’t worry I’ve got plenty of tricks up my sleeve for this build.

**BlueAqua** · 03-24-2009, 04:19 AM

I've been wondering about the Raven and I'm glad to see you back Ben. If you need somebody to use your tools here in MN, just let me know.

Where are you going to install the rad?

**ben549** · 03-25-2009, 01:05 AM

Finally some more picture updates!!!

Just a taste of what I have planned for cable management. What makes this setup unique is that the clips are screwed in, instead of being stuck on!

Fittings as they exit the case….

Fillport location

Radiator test mount to demonstrate how it can be done. Please also notice the security loop above the power supply.

PCI-E cables routed through trimmed motherboard holes.

HDD Hot swap Cable and power cable for Antec Mult-Station Elite
I’m torn with regards to the hot-swappable cables. I love the idea of being able to swap out HDD’s but I don’t want my HDD’s connected via Molex connectors.
As for the Antec cable, i might use one of the sleeveing kits from MurderMod to make it a bit more presentable.

My order from Sidewindercomputers.com…… That was fast!!! I’ve just got to say….I love this new reservoir, it’s so choice.

EK Spin Reservoir – Front Left

EK Spin Reservoir – Front Right

EK Spin Reservoir – Rear Right

EK Spin Reservoir – Rear Left

Originally Posted by BlueAqua

I've been wondering about the Raven and I'm glad to see you back Ben. If you need somebody to use your tools here in MN, just let me know.

Where are you going to install the rad?

In truth I never really left; I will always rely on XS for news, information, and inspiration.

Lol the CNC isn’t even running yet; just the drill press, vacuum press/clamping system, and computer control center are fully operational.

**dro** · 03-25-2009, 01:33 AM

s-u-b-s-c-r-i-b-e-d-d- =D

**HESmelaugh** · 03-25-2009, 01:57 AM

Nice log so far!

Looking forward to more.

**~~MomijiTMO~~** · 03-25-2009, 01:57 AM

Nice photos! Keep on going.

Thread: Silverstone Raven

Thread Tools

Search Thread

Rate This Thread

Display

Silverstone Raven

Bookmarks

Bookmarks

Posting Permissions