Quote Originally Posted by nugzo View Post
what thermal compound are you using? Never mind i see. Remember, it doesn't take much. Also you may have a warped IHS or water block. Have you considered lapping them? Just for reference.. I'm using a similar water cooling setup. At idle with 1.39v 4400mhz i'm at 40-41c. Prime Small FFT 65-66c to start then reaches 70c. I've been running this setup for almost a year (9 months) 24/7 with no problems. Last night i ran a 3dmark06 50 loop at 1920x1200 8x AA and 8x AF. Took all night but it completed with a score of 16056 and max temp of 69c with real temp. I've never been able to run IBT like some others here, just too much heat. What are your temps with Prime95 Small FFT?



I dont understand what your talking about there, can you explain? plastic stick paper?
sorry for my bad english

that doesnt matter anyway, the bubbles seems not to be the cause

for now, my room temp should be 27~29

i am running 1.35v in bios for 4.2ghz

and running prime 95 too, 70~71 load for 4cores

idle should be 40~42

i measure the temp of the surrounding of the rad too

it is 35~36

so what i am thinking is, do the block have the ability to carry heat away?

i know fuzion v2 is a good block, but i have been using it for 1 year anyway i opened it too, it is clean.

i cant measure the temp of the coolant, so i measure the rad

i assume the temp of the cooland is about 4x, is this normal? when my cpu is running 70~71

i am thinking should i sell this fuzionv2 and get a ek extreme or extreme lt