** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Triton]

Finally P95 Blend Stable ! 4.15GHz / 922MHz 5-5-5-18 with THE cheapest 2x2GB 800MHz kit you can buy !

I advise to download P95 v25.11 (32/64bit + other version links at http://www.mersenneforum.org/showthread.php?t=12155 ). Stopped using ET6 (never set any values, only checked them)


******Motherboard Voltage Control******

Load-Line Calibration.................[ Enabled ]
CPU Vcore [ 1.15 ]....................[ 1.350 ] (1.332v PC Health, 1.312v cpuz)
CPU Termination [ 1.20 ]............[ 1.300 ]
CPU PLL [ 1.50 ].......................[ 1.500 ]
CPU Reference [ 0.760 ].............[ 0.848 ] (65%)

MCH Core [ 1.100 ]....................[ 1.28 ]
MCH Reference [ 0.760 ].............[ Auto] (63%)
MCH/DRAM Refernce [ 0.900 ]......[ Auto)
ICH I/O [ 1.500 ]........................[ 1.500 ]
ICH Core [ 1.100 ]......................[ 1.100 ]

DRAM Voltage [ 1.800 ]...............[ 2.100 ] (2.080v idle/2.064v load...scary)
DRAM Termination [ 0.900 ].........[ Auto ]
Channel A Ref [ 0.900 ]..............[ Auto ]
Channel B Ref [ 0.900 ]..............[ Auto ]

800mv on CPU and PCIe drive
CPU and MCH Skew 0ps
C1E and EIST disabled, otherwise rest on defaults (V-T enabled etc)
FireWire disabled

Prime95 Blend 8.5hr v25.11 x64