**UPDATE**

I am gradually reducing the vCore. I am seeing better temps, mid to upper 50s during prime95 small FFT. I am sitting at 1.375 vCore in the BIOS and 1.34 in Windows. Here are my settings.

I am testing with Prime95 now.

Are there other settings I should be aware of as I lower my vCore?

Thanks,
-Jsunn

Code:
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 8  x     ]
Fine CPU Clock Ratio............................[ + .5     ]
CPU Frequency 4.105GHz...........................[ 483x 8.5 ]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 483      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2 [Disabled] 
 
 
******Advanced Clock Control******

CPU Clock Drive.........................[800mV]
PCI Express Clock Drive.................[900mV]
CPU Clock Skew..........................[300ps]  
MCH Clock Skew..........................[200ps]  

******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
MCH Frequency Latch.............................[ 333      ]
System Memory Multipler.........................[ 2.40B    ]
Memory Frequency 1066...........................[ 1159     ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5       ]
tRCD............................................[ 5       ]
tRP.............................................[ 5       ]
tRAS............................................[ 15      ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.25 ]......................[ 1.3750v ]  1.40625v
CPU Termination   [ 1.20    ]...................[ 1.30v   ]  
CPU PLL           [ 1.50    ]...................[ 1.610v  ]
CPU Reference     [ 0.760   ]...................[ 0.823v  ]  
 
MCH Core          [ 1.100   ]...................[ 1.360v  ]
MCH Reference     [ 0.760   ]...................[ 0.763v  ]  
MCH/DRAM Reference [ 0.900   ]..................[ 1.16v   ]  
ICH I/O           [ 1.500   ]...................[ auto    ]
ICH Core          [ 1.100   ]...................[ auto    ]

DRAM Voltage     [ 1.800v]...................[2.000v]
DRAM Termination [0.900v]....................[auto]
Channel A Reference [0.900v].................[auto]
Channel B Reference [0.900v].................[auto]