** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[cooldaddy]

Hey guys,
I am trying to run my Q9550 on the UP3P at 3.8Ghz but can't quite get it 100% stable yet, so i thought I would ask you guys for some help. Sometimes i can get OCCT to run for the hour and sometimes not, the times that I cannot i get BSOD's. With Prime95 I either get BSOD or one of the workers fail, seems to be #2 alot.

Specs:
Intel Q9550 E0
GA-EP45-UD3P Bios Ver F7
Arctic Cooler Freezer Pro 7
Patriot Viper 2x2gb 1066
Antec 900
Corsair 650w
Sapphire Radeon HD 4870 1GB

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 8        ]
Fine CPU Clock Ratio............................[ + 0.5    ]
CPU Frequency 3.8GHz............................[ 448 x 8.5  ]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 448     ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2 [Disabled] 
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 0ps     ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard    ]
(G) MCH Frequency Latch.........................[ Auto   ]
System Memory Multipler.........................[ 2.00D    ]
Memory Frequency 1066............................[ 896      ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5        ]
tRCD............................................[ 5        ]
tRP.............................................[ 5        ]
tRAS............................................[ 15       ]
 
******Advanced Timing Control******
 
tRRD[4]............................................[ 4        ]
tWTR[4]............................................[ 4        ]
tWR[8].............................................[ 5        ]
tRFC[68]............................................[ 55       ]
tRTP[4]............................................[ 4        ]
Command Rate (cmd)[0]..............................[ 2T       ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 11 ] ...............[ 9        ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto     ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto     ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto     ]
 
Dimm 1 Clock Skew Control.......................[ Auto     ]
Dimm 2 Clock Skew Control.......................[ Auto     ]
DDR Write Training..............................[ Auto     ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ Auto     ]
Data Driving Pull Up Level......................[ Auto     ]
cmd Driving Pull Up Level.......................[ Auto     ]
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]
 
Data Driving Pull Down Level....................[ Auto     ]
cmd Driving Pull Down Level.....................[ Auto     ]
ctrl Driving Pull Down Level....................[ Auto     ]
clk Driving Pull Down Level.....................[ Auto     ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 11 ] ...............[ 9        ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto     ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto     ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto     ]
 
Dimm 1 Clock Skew Control.......................[ Auto     ]
Dimm 2 Clock Skew Control.......................[ Auto     ]
DDR Write Training..............................[ Auto     ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ Auto     ]
Data Driving Pull Up Level......................[ Auto     ]
cmd Driving Pull Up Level.......................[ Auto     ]
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]
 
Data Driving Pull Down Level....................[ Auto     ]
cmd Driving Pull Down Level.....................[ Auto     ]
ctrl Driving Pull Down Level....................[ Auto     ]
clk Driving Pull Down Level.....................[ Auto     ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Disabled ]
CPU Vcore         [ 1.25 ]...................[ 1.34375    ]
CPU Termination   [ 1.20    ]...................[ 1.30    ]
CPU PLL           [ 1.50    ]...................[ 1.50    ]
CPU Reference     [ 0.760   ]...................[ 0.863   ]
 
MCH Core          [ 1.100   ]...................[ 1.340    ]
MCH Reference     [ 0.760   ]...................[ 0.863   ]
MCH/DRAM Refernce [ 0.900   ]...................[ 0.900   ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.100   ]
 
DRAM Voltage      [ 1.800   ]...................[ 2.100   ]
DRAM Termination  [ 0.900   ]...................[ 0.900   ]
Channel A Ref     [ 0.900   ]...................[ 0.900   ]
Channel B Ref     [ 0.900   ]...................[ 0.900   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

Thanks for all your help.
CD