** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[PortCitySlim]

Ya the 5:6 2.40b is bugged even on the F7 bios. I think it works on one of the older bios but not sure which one.

Do you use Load Line with this board? I could not boot with it even with the vcore set to 1.37, so I turned it off and eventually got into windows with the bios vcore set to 1.4500 and under load CPUZ reports that as 1.344(mostly) or 1.360 and that is passing prime95 small ftt for about 30 mins now at 9x470. This is totally different to me. Why does CPUZ read the ram timings at higher then what is set in the BIOS? Hoss, can you give me your full settings for your overclock and let me try that with a bit more vcore? I am thinking I will need about 1.35-1.37 in reality for 4.2-4.3ghz.


EDIT: I need to know about the "Driving Strength profile" because I have no idea what that means or does. Also I normally use TRFC of 55 with 2x2gb kits on the ASUS boards, does that stay the same for this board?