this is great info. is this the F7 bios? thanks!

J


Quote Originally Posted by fatguy1992 View Post
Heres my template for a Q6600 on a UD3P.


Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9 
CPU Frequency .........................: 3.6GHz (400X9)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 400 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: Default
PCI Express Clock Drive................: Default
CPU Clock Skew (ps)....................: 0ps 
MCH Clock Skew (ps)....................: 0ps 

DRAM Performance Control

Performance Enhance....................: Standard
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 400MHz 
System Memory Multiplier ..............: 2.0D 
Memory Frequency (Mhz) ................: 800MHz

DRAM Timing Selectable ................:  

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto.  

Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled] 
CPU Vcore..............................: 1.45
CPU Termination........................: 1.3V
CPU PLL................................: 1.50V
CPU Reference..........................: 0.823 to 0.863 

MCH/ICH

MCH Core...............................: 1.2V  
Reference..........................: 0.823 to 0.863
MCH/DRAM Ref...........................: 1.0v
ICH I/O................................: 1.5V 
ICH Core...............................: 1.100V 

DRAM
DRAM Voltage...........................: 2.0v
DRAM Termination ......................: 1.0v 
Channel A Reference....................: 1.0v
Channel B Reference ...................: 1.0v
Let me know if that works.