** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[nugzo]

Hey Panging,

Just to update you on those mem volts and 2:40 strap problem.

The volts now are all below stock My RAM says 2.1v to run at 1066Mhz and it's running 1200 (7x500) or 1200 (9x500) at low voltages 2.03vdimm.

The problem was the MCH Reference! Once I figured that setting out all my Memtest errors wore gone and I could low the voltages considerably.

Regarding the 2:40 strap problem with MCH above 1.40v I just confirm that only happens with 2Gb sticks of ram, 1Gb even thou you wanna use 4 sticks the mobo boots fine above 1.4vmch, but with 2Gb sticks nada. Common Gigabyte fix this!

I'm very stisfied with this mobo.

I'm at 1.5mch right now with these 9600's 9x500 1200mhz. Anything you want me to try concerning your issues? I'm glad to help you with any settings you want me to try. Also please list your stable bios template for us for 1200mhz. Thanks again.

You think 8gb of these 9600's will run at 1200mhz?