Gigabyte EX58-UD5/Extreme Discussion Thread

[mascaras]

I just don't understand. it may just be me, but for me to get over 205, I need to raise Qpi/vtt to over 1.6V!!!

everyone else that is running 210+ is under 1.4V

My other settings are pretty similar.

Do I just have a bad board?

Max BCLK i tested was 220 but i dont tested the stability (1.235v QPI/VTT)

http://img381.imageshack.us/img381/7872/220tj8.jpg

How stable are those settings?
For 4Ghz I need at least 1.40625V for IntelBurnTest with maximum stress

i only run about 10 minuts prime small & Blend , then i stop the test!

but with te previous F3 bios for 4Ghz i needed to use 200x20 @ 1.344v and 3.8ghz @ 1.27v (200x19)

But now the new F4K bios Turbo Option always set multi x21 (not only in single app like F3 bios ) , and now i can run 4Ghz (191x21 @ Turbo) with 1.27v

and for 3.8Ghz with F4K bios i only need 1.20v (200x19)

http://img87.imageshack.us/img87/9391/3800120vev4.jpg



Try the new F4 bios (F4K for UD5 & F4J for Extreme) , now you can use Turbo Option always with Multi x21

regards