ASUS Maximus II Formula - new P45 king?

[BuGjAE]

@radaja. OH I think your clock setting ,temp, voltage is very well fine.
And I try to follow you ,radaja. Reduce vNB and vFSB from auto setting
and here is my result.

Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8.5
FSB Frequency : 510
CPU Clock Skew : Normal
North Bridge Clock Skew : Normal
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2-1022
Dram Clock Skew CH1 A1 : Advance 300 ps
DRAM Clock Skew CH1 A2 : Auto
Dram Clock Skew CH1 B1 : Advance 300 ps
Dram Clock Skew CH1 B2 : Auto


DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 18
RAS# to RAS# Delay : 3
Row Refresh Cycle Time : 55
Write Recovery Time : 6
Read to Precharge Time : 3

Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto

Write to PRE Delay : Auto
Read to PRE Delay : Auto
PRE to PRE Delay : Auto
ALL PRE to ACT Delay : Auto
ALL PRE to REF Delay : Auto

DRAM Static Read Control: Disabled
Dram Read Training : Disabled
MEM OC Charger : Disabled
Ai Clock Twister : Lighter
Transaction Booster : Auto


PCIE Frequency : 104

CPU Voltage : 1.33125
CPU PLL Voltage : 1.5000
FSBT : 1.15300
DRAM Voltage : 2.2240
North Bridge Voltage : 1.20xxx
South Bridge Voltage 1.5 : 1.5
South Bridge Voltage 1.1 : 1.1

CPU GTL Reference 0 : AUTO
CPU GTL Reference 1 : AUTO
CPU GTL Reference 2 : AUTO
CPU GTL Reference 3 : AUTO
North Bridge GTL Reference : AUTO
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
North Bridge DDR Reference : AUTO

Load Line Calabration : Enabled
CPU Sread Spectrum : Disabled
PCIE Spread Spectrum : Disabled