Foxconn Quantum Force Black Ops X48 OC Guide (56k Warning)

[sashin]

I'm home, but so is my Gateway XHD3000 monitor, which translates into I'm gonna play with it for a bit to get it setup/running tip-top. However, I will give you my settings in the written form, here they are:

Quantum BIOS page:

Ratio - 9x
FSB - 475
CPU vs RAM - 1:4 CPU333
CPU skew - 300
CPU amplitude - 800
Spread Spectrum - Disabled

RAM Timing page:

CAS - 8
RAS# to CAS# - 8
RAS# Pre - 8
Pre Delay - 15
Row Refresh - AUTO
Performance lv - 7
tWTR - AUTO
tWR - AUTO
tRRD - AUTO
tRTP - AUTO
All Precharge refresh - AUTO
Refresh period ratio - x 1
Refresh period - AUTO
Command per Clock - 1T
Everything else - AUTO

Voltage page:

CPU Multi - 1x
vCORE - 1.30
vDroop - Enabled
PLL - 1.5088
VTT - 1.275 [1.175 real voltage]
GTL 0-3 AUTO
vNB - 1.375
NB GTL - AUTO
vSB - 1.388
vDIMM - 1.84
Everything else - Default

CPU Feature page:

Core Multi - Enabled
Everything else - Disabled

Thanks for the info Telo, LardArse and flanr. After getting input from youorselves and Anandtech settings. I have been able to run 3DMark 06 and 3DMark Vantage with success so far. See pics attached. I do not know if these results are repeatable and i have yet to run Super Pi, Prime 95 , Everest Benchmark Test or Custom PC 2007 Benchamark Suite. These results were obtained with Antivurus running in the background (ie NOT disabled with full internet connection). My with Ageia panel showing 58 celcius on full load and NB temp are 42 full load (while running 3DMark Vantage CPU test)