Quote Originally Posted by sashin View Post
Have tried command dll at auto and also at -2..still getting in Vista no problems BUT the moment i run 3DMark 06...after a few minutes i get BSOD..!!
I have also tried Ctrl dll and clock dll setting ranging from
-3 to +3 each....still no go..
any other suggestions people....saaya, Lardarse, Telo?
I have also left all other memory timings at auto and have also adjusted settings according to
http://www.benchtec.co.uk/forums/sho...?t=1423&page=8

still no luck

Regards
just for quick check will u try this, bgtw wats temp of cpu/nb?

cpu volts
1.47v
enabled vdrooop compensate

vtt 1.35v
gtl0 + 12
gtl1 + 7
gtl2 +12
gtl3 +12

vnb 1.8v
ddr depends on rams, maybe 2.15v to 2.2v (maybe ur rams like lower volts like 2.04v)


1:4 fsb 333

mem settings:

set manually - CL 7-7-7-21- performance level 7, 2T
clock skew try both auto and +300ps
10 x 400 save and exit

doe sit go further?
also can try same settings but:

1:2.665
mem settings:

set manually - CL 5-6-6-18- performance level 9, 2T