Phenom 9500 w/ MSI K9A2 Platinum

[KTE]

I'm not sure if my instability is my PSU's fault, I'm not sure how to measure that. The PSU is a generic 585w that came with my generic case.

Yea, most of them are complete junk. Which brand/model is it?
Get a quality one or you'll be at the very least slowly killing all your hardware

BTW, how do I adjust the multipler within the bios? Any other suggestions?

Using the AM2+ P-State options, CPU FID.

which setting in bios do i work with? DCT 0/DCT 1/BOTH?

Both.

AND tRC only goes to 42.....
or just changing them in memset good enough?

Should be good enough. Memtest 30 and see how it works, it should be stable.

2.6Ghz on cores 0 and 1. 2.4Ghz on cores 2 and 3. Stock vcore, 1.2v.
http://www.jmbat.com/media/phenomoc/..._3DMark06.jpg]

Can you not try 1.26-1.3v for 2650 across all cores?

======

Dropped my 4850e back last night, picked up 4450e X2 2.3G instead. Waiting for another MSI and DFI 790FX board now. Also dropped my 780G back and picked up the 740G instead.

Build cost:- £130

AMD Athlon X2 4450e 2.3G 45W - £40
Corsair 2x1GB 800 4-4-4-12 - £25
Gigabyte 740G - £35
Seasonic S12 330W - £30

First dime I spent on PCs since 15 months.. very happy with that