**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[strange|ife]

Vcore:

VTT:

MCH:

ICHIO:



Thanks for your inputs!

These work for me on 400x9

VTT:1.27
MCH:1.29
:ich:1.09
ICHIO:1.55

Vcore will depend your chip, if running 1:1 your FSB shouldnt have any problems and 1.29 mch is fine. 1.33v tops for 400FSB. Your vdimm settings will vary per memory aswell.

hope that helps.

[BassKozz]

here is one suggestion for the NB and PWM:

http://www.xtremesystems.org/forums/...&postcount=760

just balance a 60mm or an 80mm over the pwm, if you have a tuniq or TRUE heatsink it's pretty easy to get it balanced right so it dont fall. I used one zip tie on the right edge to attach a 40mm evercool to the NB..it does alright.

Thanks for the suggestions,
and are you pointing the fans/air at(push) or away(pull) from the heatsinks?

Ace-a-rue, from the looks of the pics you are pushing air towards the heatsinks, is that correct?

[Ace-a-Rue]

Thanks for the suggestions,
and are you pointing the fans/air at(push) or away(pull) from the heatsinks?

Ace-a-rue, from the looks of the pics you are pushing air towards the heatsinks, is that correct?

i always try to push air flow over the heatsink.

[BassKozz]

These work for me on 400x9

VTT:1.27
MCH:1.29
:ich:1.09
ICHIO:1.55

Vcore will depend your chip, if running 1:1 your FSB shouldnt have any problems and 1.29 mch is fine. 1.33v tops for 400FSB. Your vdimm settings will vary per memory aswell.

hope that helps.

strange|ife,
What vCore are u using to get 400x9?

I've hit a roadblock, and I can't seem to get to 400x9

[BenSanford]

I currently have a rev. 1.0 board on the PC that I'm currently using, and planning on another build with a new rev 1.1 board in another case. I would like to put a new E8400 processor into the system that I will start using, and pass the system with the E6750 CPU to my wife.

Would there be any advantage (or not) to pairing the E8400 processor with the newer or the older MB? I'm probably going to open up my case as well to swap some memory, etc, so the effort in moving things between systems isn't a concern

[wilson]

Hi guys how do i post pictures as ive just put some thermalright HR-05-IFX chipset cooler`s on and have some pic`s i want to load up but don`t know how
Cheers Paul..

[redrumy3]

Hi guys how do i post pictures as ive just put some thermalright HR-05-IFX chipset cooler`s on and have some pic`s i want to load up but don`t know how
Cheers Paul..

load them on www.imageshack.us and post link here

[BassKozz]

Hi guys how do i post pictures as ive just put some thermalright HR-05-IFX chipset cooler`s on and have some pic`s i want to load up but don`t know how
Cheers Paul..

photobucket.com

[Ace-a-Rue]

Hi guys how do i post pictures as ive just put some thermalright HR-05-IFX chipset cooler`s on and have some pic`s i want to load up but don`t know how
Cheers Paul..

you can load up to 5 images when you make a post by clicking on "manage attachments"...then, click on browse to add an image from your computer that is 200 KB or less in size.

[redrumy3]

new bios is working great on my end.

now im running 450 x 8 1.45v in bios and under load it goes to 1.42 much better than other bios. mch is on auto ddr2 2.1v 5-5-5-12 =] loving it so far

[BassKozz]

new bios is working great on my end.

now im running 450 x 8 1.45v in bios and under load it goes to 1.42 much better than other bios. mch is on auto ddr2 2.1v 5-5-5-12 =] loving it so far

What Proc are you using?

[redrumy3]

What Proc are you using?

Q6600 G0

[Volkswagen]

what was your vdroop like with the old bios and what was ur old bios?