Quote Originally Posted by turtletrax View Post
Hey guys. Closing in on 4x1GB stable and 4Ghz with my G0 Q66, but I need 2.31vdimm to do so. I only needed 2.15v max to get 1066 on my 680i with 4GB

This is on the 9/13 Bios
Here are my settings. LMK if there is anything you can suggest.

Code:
CAS Latency Time (tCL): 5
RAS# to CAS# Delay (tRCD): 5
RAS# Precharge (tRP): 5
Precharge Delay (tRAS): 15
All Precharge to Act: 5
REF to ACT Delay (tRFC): 32
Performance Level: 7
MCH ODT Latency: AUTO
Write to PRE Delay (tWR): 12
Rank Write to Read (tWTR): 10
ACT to ACT Delay (tRRD): 3
Read to Write Delay (tRDWR): 8
Ranks Write to Write (tWRWR): AUTO
Ranks Read to Read (tRDRD): AUTO
Ranks Write to Read (tWRRD): AUTO
Read CAS# Precharge (tRTP): 2
ALL PRE to Refresh: AUTO
Edit: Quad SuperPi 32M just crapped out. No matter what I try I cannot get 4X1G stable. I have tested each kit seperately and know them as working.

Arg
I think you will find it hard if not imposable to get a Q6600 @ 4GHz & 4GB of RAM Prime blend stable, will your CPU run small fft @ 4GHz or are you just trying to get it working/PI/game stable ?

Voltages aside (I think maybe a tad more NB & vcore)

I would try TWR/13-14 TWTR/12 TRTP/3-4 & manually set All PRE to refresh to 4-5 then run Prime95 v25.5 selecting/custom/4096-4096fft for an hour if that holds you should be fine with the RAM.

If you don't already use it get Memset v3.4 beta 3 so you can view/change the above settings from windows whilst testing for stability.

CN