Quote Originally Posted by XtremeTiramisu View Post
Before I can tell you whether it's "too" high of a temp or not, you might want to tell us what's the ambient temp in the room when you captured the screenshot and what kind of cooling are you using.

Just by looking at your load temps without taking other factors in, I think it's a little high. When I had my G0 Q6600 OC'ed to 3600MHz stage with only roughly 1.39v, my load temp was only around 60~62C.

I just noticed that your G0 Q6600 VID is lower than mine (1.2625v), suppose your lower VID means better OC-ability at lower volts but seems not?? If you need 1.475v set in BIOS and 1.45v Load to get 3600MHz stable for a 1.2375 VID G0 Q6600, I don't think it's doing too good or it could be the mobo. It looks like your VID should be rather 1.3000v in relative to the settings you've.
well im running water cooling at the moment, my first setup, its petras elite kit.

the ambient temp in the room is about 26C

i was hoping this was a good OCer, i was able to boot and play games just fine and run benchmarks no problemt @ 1.4v, but crashed after about 20min of prime

i havn't really touched any of the motherboard voltages, only the cpu, any tips??