***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[stasio]

Nothing helped even after power disconnect/battery removed overnight. This morning the board didn't want to start, no fans no anything, like there wasn't any power. Disconnected the 24-pin ATX connector, tested the PSU (green<->black shorting-OK) and started after that. But still identifies as Z68 board. Flashed it with F4 bios from Giga site (using my own modded F4) and that was the fix. Back to my modded F4 and all is good. Apparently my modded F4 bios doesn't override some chip arias or something...

Ooh, and why after no power/no battery overnight the power button and power LEDs are still on?!?! Even with 24-pin ATX disconnected... W(here)TF is power coming from!?!?!?

Lsdmeasap help me to solve the problem (and test).
eSATA option is the problem, not Intel ROM or that new ROM setting in the BIOS, you can set that anyway you want.
But main issue is eSATA setting so anyone that flashed already from yesterdays BIOS files can just wait at the splash screen until they can enter the BIOS, or wait until windows loads and then disable eSATA via BIOS or Touch BIOS.

So these have new RAID Rom (Which didn't matter), and a instruction on how to flash and make the hang stop once you flashed over to Z68X-UD7.

http://www.mediafire.com/?43stclpfddy5d1p

Btw,

Easy Tune6 (Intel) B11.0512.1

-Add LLC levels