Page 37 of 239 FirstFirst ... 27343536373839404787137 ... LastLast
Results 901 to 925 of 5952

Thread: ***Asus Rampage III Extreme Owners Thread***

  1. #901
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Quote Originally Posted by calves View Post
    Hello everybody, am new to the forum and this is my 1st post


    sync mode: ENABLE

    Ai overclock Tuner: MANUAL
    OC from CPU level up: AUTO

    CPU Ratio setting: 21
    CPU Turbo power limit: ENABLE

    Cpu configiguration:

    BCLK Freq: 190
    PCIE Freq: 103
    Dram Freq: DDR3-1523MHZ
    UCLK Freq: 3046
    QPI Link Data Rate: AUTO

    Memory Configuration protect: DISABLE
    Dram timing Control --> set timings to manual eg 8-8-8-24 andTRFC to 88

    Cpu Differential Amplitude: AUTO
    CPU clock skew: AUTO
    IOH Clock skew: AUTO


    Digi+ pwr mode: X-POWER
    pwm volt control: AUTO
    Load-line calibraction: AUTO
    CPU voltage OCP: ENABLE
    CPU PWM Freq: AUTO

    Extreme OV: DISABLE
    Extreme OC: AUTO

    CPU voltage: 1.32
    CPU pll voltage: 1.81525
    QPI/Dram core voltage(vtt): 1.35 (try to lower later)
    Dram Bus voltage: 1.65
    IOH voltage: 1.20575
    IOH pcie voltage: AUTO
    ICH voltage: 1.20575
    ICH pcie voltage: AUTO

    CPU spread spectrum: DISABLE
    PCIE spread spectrum DISABLE

    ________________________________

    CPU Ratio Setting: 21
    C1E Support: DISABLE
    Hardware Prefetcher: DISABLE
    Adjacent Cache Line Prefetch: DISABLE
    Intel Virtualization Tech: DISABLE
    CPU TM Function: DISABLE
    Intel HT Technology: ENABLE
    Active Processor Cores: ALL
    A20M: DISABLE
    Intel SpeedStep(TM) Tech: DISABLE
    Intel C-STATE Tech: DISABLE
    Try the above plz... I can boot and be stable at 227 Bclock with my crap 950... no other board has done that here (not Xpower, not UD9)
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  2. #902
    Registered User
    Join Date
    May 2010
    Posts
    6
    Quote Originally Posted by Leeghoofd View Post
    Try the above plz... I can boot and be stable at 227 Bclock with my crap 950... no other board has done that here (not Xpower, not UD9)
    ok, I'll do that and add 200 in bclk to 4.2, very soon send news, and thanks for the quick replies

    By the way sorry ignorance but what is the option (UD9) ?
    Last edited by calves; 06-15-2010 at 01:51 AM.
    Core I7 920 -D0 (4.0Ghz) | Motherboard Asus Rampage III Extreme | OCZ CL8 PC3-12800 DDR 3 (1600) Tri-Channel (3x2GB)
    Western Digital Raptor-X 150Gg | Samsung SATA-2 1TB 32Mb | Maxtor SATA2 250Gb
    Asus GTX_285 | Thermaltake Armor+ | Nox 750W | Thermaltake Tribe VX Watercooling
    Webpage.

  3. #903
    Registered User
    Join Date
    Mar 2010
    Location
    Flevoland The Netherlands
    Posts
    32
    Quote Originally Posted by calves View Post
    ok, I'll do that and add 200 in bclk to 4.2, very soon send news, and thanks for the quick replies

    By the way sorry ignorance but what is the option (UD9) ?
    He's refering to the Gigabyte UD9 Motherboard.

    Ill post you my template tonight, if your still having no luck, I'm at work atm.
    System Specs

    Asus Rampage III Extreme (BIOS 0704) + EK Full Cover Waterblock
    Intel i7 920 D0 Stepping, SLBEJ 4.2ghz stable + EK waterblock
    G.Skill Trident 3X2GB Tri Channel 9-9-9-24 @ 9-9-9-24 1N
    Sapphire Radeon 5970 @ 850mhz // 1110mhz + Koolance Waterblock
    Nvidia XFX 9600 GSO XXX for Physx
    Corsair Obsidian 800D Case
    Corsair 1000W Modular PSU
    Laing D5 - Waterpump
    EK 360 Radiator
    Phobya Resovoir
    Tygon 1/2"id 3/4"od Clear Tubing
    RAID 0 Velociraptors


  4. #904
    Xtreme Member
    Join Date
    Aug 2009
    Location
    Austin
    Posts
    134
    Out of all the chips tested this is the 2nd best so far...

  5. #905
    Registered User
    Join Date
    Mar 2010
    Location
    Flevoland The Netherlands
    Posts
    32
    Very impressive Bodar,

    my word you must have pumped some cash into your machine, how many chips do you now own?

    I must admit I really want one of these 980's what's the secret and the best to look out for?
    Last edited by kortas; 06-15-2010 at 02:23 AM.
    System Specs

    Asus Rampage III Extreme (BIOS 0704) + EK Full Cover Waterblock
    Intel i7 920 D0 Stepping, SLBEJ 4.2ghz stable + EK waterblock
    G.Skill Trident 3X2GB Tri Channel 9-9-9-24 @ 9-9-9-24 1N
    Sapphire Radeon 5970 @ 850mhz // 1110mhz + Koolance Waterblock
    Nvidia XFX 9600 GSO XXX for Physx
    Corsair Obsidian 800D Case
    Corsair 1000W Modular PSU
    Laing D5 - Waterpump
    EK 360 Radiator
    Phobya Resovoir
    Tygon 1/2"id 3/4"od Clear Tubing
    RAID 0 Velociraptors


  6. #906
    Xtreme Member
    Join Date
    Aug 2009
    Location
    Austin
    Posts
    134
    Thanks man! I decided to basically test 20 chips total.. Not all where 980x's A couple x5660's and a xeon w3680 as well.. This time I tried to get the same batch number for all 980x's.. This batch is great! So far the
    lowest clock I've seen on this batch is 6400mhz.. There's 2 chips that I really like but I'll probably sell the rest.. Just decided to go nuts this time.. Hope to make a little money back once I sell them. cheers!! -Beaux

  7. #907
    Registered User
    Join Date
    Mar 2010
    Location
    Flevoland The Netherlands
    Posts
    32
    Sorry I referred to you as Austin instead of Bodar, I was looking at your location and it stuck in my mind lol.

    I assume you are using LN2 to cool these chips at that speed?
    System Specs

    Asus Rampage III Extreme (BIOS 0704) + EK Full Cover Waterblock
    Intel i7 920 D0 Stepping, SLBEJ 4.2ghz stable + EK waterblock
    G.Skill Trident 3X2GB Tri Channel 9-9-9-24 @ 9-9-9-24 1N
    Sapphire Radeon 5970 @ 850mhz // 1110mhz + Koolance Waterblock
    Nvidia XFX 9600 GSO XXX for Physx
    Corsair Obsidian 800D Case
    Corsair 1000W Modular PSU
    Laing D5 - Waterpump
    EK 360 Radiator
    Phobya Resovoir
    Tygon 1/2"id 3/4"od Clear Tubing
    RAID 0 Velociraptors


  8. #908
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Don't think there's any other way to go over 6ghz with a GT...
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  9. #909
    Registered User
    Join Date
    May 2010
    Posts
    6
    Quote Originally Posted by Leeghoofd View Post
    Try the above plz... I can boot and be stable at 227 Bclock with my crap 950... no other board has done that here (not Xpower, not UD9)
    Leeghoofd I have no luck, I did exactly everything you said and did not work after 12 seconds in LinX i have a blue screen, then try again with the Vcore to 1.38 and still gave error on LinX after 13 seconds.
    Core I7 920 -D0 (4.0Ghz) | Motherboard Asus Rampage III Extreme | OCZ CL8 PC3-12800 DDR 3 (1600) Tri-Channel (3x2GB)
    Western Digital Raptor-X 150Gg | Samsung SATA-2 1TB 32Mb | Maxtor SATA2 250Gb
    Asus GTX_285 | Thermaltake Armor+ | Nox 750W | Thermaltake Tribe VX Watercooling
    Webpage.

  10. #910
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    try first Prime95, set to 8 threads and run Custom 20-20K set... this to determine CPU stability first..., then we will move on from there... if it reboots you need more Vcore...
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  11. #911
    Registered User
    Join Date
    May 2008
    Location
    Egypt
    Posts
    93
    Quote Originally Posted by kortas View Post
    Please post your system specs, in particular RAM and CPU PSU and GFX.

    hae you tried the 0704 BIOS, its 100% better than the rest for me personaly running a 920 stable at 4.2ghz, i can reach 4.4ghz to now after some voltage tweeks.
    Can you post your BIOS settings for 4.4Ghz with the 920 and 0704 Bios ?



    I am at 4.33Ghz now :



    No POST for over 222 BCLK
    Last edited by minaelromany; 06-15-2010 at 05:23 AM.
    Core i7 920 @4.25 with Noctua NH-D14
    Asus Rampage III Extreme
    6GB Triple Channel OCZ Blade DDR3 2025 9-9-9-24-1T
    HD6990+HD6970@950Mhz/6Ghz GDDR5 Tri-Fire
    3 BenQ 2420HD 1080p 24" Widescreen LCD in Eyefinity
    OCZ Vertex 3 Max IOPS 120GB SSD + Many HDDs !
    X-Fi Titanium-Cambridge SoundWorks DTT 3500 Digital
    Seasonic X-850
    2xBenq 1640 - LiteOn iHAS120-Pioneer 111L - Samsung 203B - NEC Optiarc AD-7200S DVD+/-RW burners
    NZXT Phantom Red Edition

  12. #912
    Xtreme Member
    Join Date
    Nov 2007
    Posts
    107
    Quote Originally Posted by Bodar View Post
    Thanks man! I decided to basically test 20 chips total.. Not all where 980x's A couple x5660's and a xeon w3680 as well.. This time I tried to get the same batch number for all 980x's.. This batch is great! So far the
    lowest clock I've seen on this batch is 6400mhz.. There's 2 chips that I really like but I'll probably sell the rest.. Just decided to go nuts this time.. Hope to make a little money back once I sell them. cheers!! -Beaux
    What is the batch
    GOOC 2010 FR: #2

  13. #913
    Xtreme Addict
    Join Date
    Jul 2007
    Location
    Arizona - USA
    Posts
    2,200
    Quote Originally Posted by paill View Post
    What is the batch
    http://www.xtremesystems.org/forums/...&postcount=876
    //RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//


  14. #914
    I am Xtreme
    Join Date
    Feb 2007
    Posts
    5,413
    Just one H20:


    But I bet I have the sexiest case of any R3 owner

    "Thing is, I no longer consider you a member but, rather a parasite...one that should be expunged."

  15. #915
    Registered User
    Join Date
    Nov 2008
    Posts
    36
    Pretty impressed with this board

    255 bclck was impossible on my RIIE...Vtt was only 1.4 v
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ScreenHunter_01 Jun. 15 10.54.gif 
Views:	738 
Size:	146.9 KB 
ID:	105519  
    Last edited by brolloks; 06-15-2010 at 09:07 AM.
    CPU's : i7-2600k
    Bench Boards : Maximus IV Extreme
    RAM : 2 x 2 G.Skill DDR3-2133 : 7-9-7-20
    GPU's : Asus CUII GTX 580 SLI


  16. #916
    Registered User
    Join Date
    Nov 2008
    Location
    uk
    Posts
    87
    thats just amazing 1.4 vcore to get that 4.8 got your self a great chip there i cant even get 4.3 stable at 1.37 vcore.
    MB Name:Rampage III Extreme
    BIOS Version : 0602
    CPU Name :Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz
    Memory information:CMG6GX3M3A2000C8 - 6GB (3x2GB) Corsair Dominator GT, DDR3 PC3-16000(2000), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
    OS information :Windows 7 Ultimate 64 Bit version
    1200 watt psu tough power
    2 280gtx sli

  17. #917
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    anyone else having trouble with 704, I get corrupted bios reflashed twice now.
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  18. #918
    Registered User
    Join Date
    Nov 2008
    Posts
    36
    0704 works fine for me, have not OC'd the 980 yet with it, will see if I can get the 255 bclck as well
    CPU's : i7-2600k
    Bench Boards : Maximus IV Extreme
    RAM : 2 x 2 G.Skill DDR3-2133 : 7-9-7-20
    GPU's : Asus CUII GTX 580 SLI


  19. #919
    Xtreme Member
    Join Date
    Dec 2008
    Location
    Australia
    Posts
    322
    flashed to 704 using ez flash yesterday from 534 worked fine thankfully

  20. #920
    Xtreme Member
    Join Date
    Dec 2008
    Location
    Australia
    Posts
    322
    Quote Originally Posted by brolloks View Post
    Pretty impressed with this board

    255 bclck was impossible on my RIIE...Vtt was only 1.4 v
    what cooling did you use for that run?

  21. #921
    Registered User
    Join Date
    Nov 2008
    Posts
    36
    Single Stage
    CPU's : i7-2600k
    Bench Boards : Maximus IV Extreme
    RAM : 2 x 2 G.Skill DDR3-2133 : 7-9-7-20
    GPU's : Asus CUII GTX 580 SLI


  22. #922
    Xtreme Member
    Join Date
    Dec 2008
    Location
    Australia
    Posts
    322
    Quote Originally Posted by brolloks View Post
    Single Stage
    cheers for that, trying to compile some info on o/c and extreme cooling used

    nice bclk btw

  23. #923
    Registered User
    Join Date
    Jun 2009
    Posts
    85
    Splave Im all good on 0704, not sure what to suggest sorry !

    Kortas, you are very welcome my friend, glad your all up and stable.

    Ive ended up at 4.2 stable with my 920 , cant run to the 980 as Ive done my cash for now on a couple of C300s ( raid 0 on the Marvell) very pleased with them so far :-)

    Rick

  24. #924
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    I think its the 5984 bios on my bios chip 1 that is messing it up when I go back and forth. Will try flashing both to 704
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  25. #925
    Registered User
    Join Date
    Nov 2008
    Location
    uk
    Posts
    87
    Ok just updated my bios to 0704 all went well so i tried 200x21 for 4.2 and vcore at 1.375 it just would not boot into windows BSOD!!!Can some1 plz post some bios settings for me to try dying to get this 980x stable at 4.2 or 4.3 that will do me.But having problems geting there
    i have added a template i have copied would like to know what to set it at for 4.2 or 4.3ghz.
    Target CPU Frequency 4410MHz
    Target DRAM Frequency 1683MHz

    LN2 Mode: Disabled***
    QPI Loadline Calibration: Enabled***

    Sync Mode [Enabled]
    AI Overclock Tuner [Manual]
    OC From CPU level Up [Auto]
    CPU Ratio Setting [21.0]
    CPU Turbo Power Limit [Disabled]

    >CPU Configuration----------------------------
    CPU Ratio Setting [21.0]
    C1E Support [Enabled]
    Hardware Prefetcher [Enabled]
    Adjacent Cache Line Prefetcher [Enabled]
    Intel(R) Virtualiyation Tech [Enabled]
    CPU TM Function [Disabled]
    Execute Disable Bit [Enabled]
    Intel(R) HT Technology [Enabled]
    Active Processor Cores [All]
    A20M [Disabled]
    Intel(R) SpeedStep(TM) Tech [Enabled]
    Intel(R) C-STATE Tech [Enabled]
    C State package limit setting [Auto]
    ----------------------------------------------

    BCLK Frequency [210]
    PCIE Frequency [100]
    DRAM Frequency [1683]
    UCLK Frequency [3789]
    QPI Link Data Rate [7579]

    Memory Configuration Protect [Disabled]

    >DRAM Timing Control--------------------------
    CAS# Latency 6 [6]
    RAS# to CAS# Delay 7 [7]
    RAS# PRE Time 6 [6]
    RAS# ACT Time 18 [18]
    RAS# to RAS# Delay 4 [4]
    REF Cycle Time 72 [72]
    WRITE Recovery Time 12 [10]
    READ to PRE Time 6 [6]
    FOUR ACT WIN Time 24 [Auto]
    Back-To-BackCAS# Delay 0 [Auto]

    Timing Mode 1N [1N]
    Round Trip Latency on CHA 60 [60]
    Round Trip Latency on CHB 62 [62]
    Round Trip Latency on CHC 64 [64]

    WRITE To READ Delay(DD) 8 [Auto]
    WRITE To READ Delay(DR) 8 [Auto]
    WRITE To READ Delay(SR) 18 [Auto]
    READ To WRITE Delay(DD) 7 [Auto]
    READ To WRITE Delay(DR) 7 [Auto]
    READ To WRITE Delay(SR) 7 [Auto]
    READ To READ Delay(DD) 7 [Auto]
    READ To READ Delay(DR) 6 [Auto]
    READ To READ Delay(SR) 4 [Auto]
    WRITE To WRITE Delay(DD) 8 [Auto]
    WRITE To WRITE Delay(DR) 8 [Auto]
    WRITE To WRITE Delay(SR) 18 [Auto]
    ----------------------------------------------

    CPU Differential Amplitude [Auto]
    CPU Clock Skew [Auto]
    IOH Clock Skew [Auto]
    ------------ Extreme Engine Digi+ ------------
    Digi+ PWR Mode [T-Balanced]
    PWR Volt. Control [Auto]
    Load-Line Calibration [Full]
    CPU Voltege OCP [Enabled]
    CPU PWM Frequency [1000kHz]

    Extreme OV [Disabled]
    Extreme OC [Auto]

    CPU Voltage 1.415 [1.41250]
    CPU PLL Voltage 1.812 [Auto]
    QPI/DRAM Core Voltage 1.310 [1.31250]
    DRAM Bus Voltage 1.654 [Auto]

    >DRAM REF Voltages----------------------------
    DRAM DATA REF Voltage on CHA [Auto]
    DRAM CTRL REF Voltage on CHA [Auto]
    DRAM DATA REF Voltage on CHB [Auto]
    DRAM CTRL REF Voltage on CHB [Auto]
    DRAM DATA REF Voltage on CHC [Auto]
    DRAM CTRL REF Voltage on CHC [Auto]
    ----------------------------------------------

    IOH Voltage 1.244 [Auto]
    IOH PCIE Voltage 1.508 [Auto]

    ICH Voltage 1.111 [Auto]
    ICH PCIE Voltage [Auto]

    ---------- Spread Spectrum Control -----------
    CPU Spread Spectrum [Disabled]
    DRAM Spread Spectrum [Disabled]



    plz not above settings are just copied from another site and the settings on it will not work for me as of my ram is dominator gt 2000mhz.Anyone with simular spec to mines can u post your settings thanks .
    MB Name:Rampage III Extreme
    BIOS Version : 0602
    CPU Name :Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz
    Memory information:CMG6GX3M3A2000C8 - 6GB (3x2GB) Corsair Dominator GT, DDR3 PC3-16000(2000), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
    OS information :Windows 7 Ultimate 64 Bit version
    1200 watt psu tough power
    2 280gtx sli

Page 37 of 239 FirstFirst ... 27343536373839404787137 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •