***Asus Rampage III Extreme Owners Thread***

[calves]

Hello everybody, am new to the forum and this is my 1st post

I wanted to get to 4.2 Ghz but it's getting impossible , I can go to the windows, play ect ... but when I start making stability tests are then gives errors freezes or blue ,
this time after much research and headaches always got to 4.0GHz stable with these temps:

sync mode: ENABLE

Ai overclock Tuner: MANUAL
OC from CPU level up: AUTO

CPU Ratio setting: 21
CPU Turbo power limit: DISABLE

Cpu configiguration:

BCLK Freq: 190
PCIE Freq: 100
Dram Freq: DDR3-1523MHZ
UCLK Freq: AUTO
QPI Link Data Rate: AUTO

Memory Configuration protect: DISABLE
Dram timing Control

Cpu Differential Amplitude: 800MV
CPU clock skew: DELAY 300PS
IOH Clock skew: AUTO


Digi+ pwr mode: X-POWER
pwm volt control: AUTO
Load-line calibraction: FULL CALIBRATION
CPU voltage OCP: ENABLE
CPU PWM Freq: AUTO

Extreme OV: DISABLE
Extreme OC: AUTO

CPU voltage: 1.27500
CPU pll voltage: 1.81525
QPI/Dram core voltage(vtt): 1.26250
Dram Bus voltage: AUTO
IOH voltage: 1.20575
IOH pcie voltage: AUTO
ICH voltage: 1.20575
ICH pcie voltage: AUTO

CPU spread spectrum: DISABLE
PCIE spread spectrum DISABLE

________________________________

CPU Ratio Setting: 21
C1E Support: DISABLE
Hardware Prefetcher: DISABLE
Adjacent Cache Line Prefetch: DISABLE
Intel Virtualization Tech: DISABLE
CPU TM Function: DISABLE
Intel HT Technology: ENABLE
Active Processor Cores: ALL
A20M: DISABLE
Intel SpeedStep(TM) Tech: DISABLE
Intel C-STATE Tech: DISABLE

Obviously the 4.2 will be impossible for my processor, I've exhausted all possible bios, 0402 / 0534 / 0602 / and now I am with the 0702 beta,
we'll going to see, something to say about my overclockink guys? something wrong there?

I've done a 128465468 possible combinations and never got stability, where meth bclk 200 never get stability, there will be something that is failing me?