ASUS Maximus II Formula - new P45 king?

[humeyboy]

OK 1st thanks for info but its not really any good to anyone.

Need to know if its 1:1 and GTL Values etc.

I gather by your Memory Voltage its not 1:1 (which is harder on NB) unless that's PC6400 your overclocking.

I cannot go for non 1:1 for 5000FSB as my Memory will not do 1200mhz on this Mobo (supposedly it will on other Mobos as its the older Rev and clocks well).

All the Memory settings that can be enabled or disabled should not matter if 1:1 if its at least PC8500 as at 1000mhz it will be underclocked.

Also due to me currently doing some work on PC I have only 4GB installed so it again should be easier even on a Rev A2 NB.

I tried your above settings be it a different NB and CPU but it would have been a good starting point IMO.

I cannot even get to Windows, chucks it after Bios posts.

I have Primed at 500FSB before but it was not for long and no settings were stable for any 2 reboots and even tried it with only 1 Memory Module so 2GB and even a 1GB PC6400 Module I know does 1000MHZ in other Mobos and it still isn't stable.