MMM
Results 1 to 25 of 2641

Thread: UnOfficial EVGA X58 Classified Owners Thread

Threaded View

  1. #11
    Registered User
    Join Date
    Mar 2009
    Posts
    27
    71proste

    Try the bolded changes:

    Frequency Control
    CPU Clock Ratio ( 21X )
    CPU Host Frequency (Mhz) ( 215 )
    MCH Strap ( Auto )
    CPU Uncore Frequency ( Auto )
    CPU Clock Skew ( 0 ps )
    Spread Spectrum ( Disabled )
    PCIE Frequency (Mhz) ( 107 )


    Memory Feature
    Memory Speed ( )
    Memory Control Setting ( Enabled )
    Memory Frequency ( 1722Mhz / 2:8 )
    Channel Interleave Setting ( 6 Way )
    Rank Interleave Setting ( 4 Way )
    Memory Low Gap ( Auto )
    tCL Setting ( 9 )
    tRCD Setting ( 9 )
    tRP Setting ( 9 )
    tRAS Setting ( 24 )
    tRFC Setting ( 88 )
    Command Rate ( 1t )


    Voltage Control
    EVGA VDroop Control ( Without VDroop )
    CPU VCore ( 1.3875 )
    CPU VTT Voltage ( +75 )
    CPU PLL VCore ( 1.65 )
    IOH PLL VCore ( 1.65 )
    DIMM Voltage ( 1.65 )
    DIMM DQ Vref ( +0mV )
    QPI PLL VCore ( 1.275 )
    IOH VCore ( 1.1 )
    IOH/ICH I/O Voltage ( 1.500 )
    VTT PWM Frequency ( 610KHz )
    CPU PWM Frequency ( 1210 )
    CPU Impedance ( Less )
    QPI Signal Compensation ( Auto )
    ICH VCore ( Auto )


    CPU Feature
    Intel SpeedStep ( Disabled )
    Turbo Mode Function ( Enabled )
    CxE Function ( Disabled )
    Execute Disable Bit ( Disabled )
    Virtualization Technology ( Disabled )
    Intel HT Technology ( Disabled )
    Active Processor Cores ( All )
    QPI Control Settings ( Enabled )
    QPI Link Fast Mode ( Enabled )
    QPI Frequency Selection ( 4.8GB/s )
    OC Recorvery ( Disabled )

    PnP/PCI PCI Express
    Maximum Payload Size ( 4096 )





    Michowski
    Try these changes:

    CPU VCore ( 1.35v )
    CPU VTT Voltage ( +200 )
    CPU PLL VCore ( 1.65 )
    IOH PLL VCore ( 1.65 )
    QPI PLL VCore ( Auto )
    QPI Frequency Selection ( 4.8GB/s )
    Last edited by Capper5016; 10-19-2009 at 08:25 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •