UnOfficial EVGA X58 Classified Owners Thread

[71proste]

71proste

Try the bolded changes:

Frequency Control
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 215 )
MCH Strap ( Auto )
CPU Uncore Frequency ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 107 )


Memory Feature
Memory Speed ( )
Memory Control Setting ( Enabled )
Memory Frequency ( 1722Mhz / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1t )


Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.3875 )
CPU VTT Voltage ( +75 )
CPU PLL VCore ( 1.65 )
IOH PLL VCore ( 1.65 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.275 )
IOH VCore ( 1.1 )
IOH/ICH I/O Voltage ( 1.500 )
VTT PWM Frequency ( 610KHz )
CPU PWM Frequency ( 1210 )
CPU Impedance ( Less )
QPI Signal Compensation ( Auto )
ICH VCore ( Auto )


CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Disabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8GB/s )
OC Recorvery ( Disabled )

PnP/PCI PCI Express
Maximum Payload Size ( 4096 )

Thanks but no changes same story,I can run prime95 215x21 ht on/off no problems

but bclk 215+ totally unstable even for spi 1M
on re2 bclk 218-220 spi32m with no problems at all

it seems like bclk 217 is the max bclk for this board spend 5 hours yesterday night and still didn't find solution