Quote Originally Posted by One_Hertz View Post
Memory timings are fine, this was the very first time I changed any values on it so everything was VERY conservative. I was planning to push everything up in windows through easy tune. It was 440x10, 1.49vcore, I added 0.1v to MCH, added some termination voltage and added some PLL. RAM was only at 1000mhz, 5-6-6-18, 2.2volts (this is below spec).

Nope didn't update the BIOS, was going to try to OC first...

Just removed the CMOS battery and waiting now...
First, it's imperative to discover your CPU Ref1, Ref2 and MCH Ref, if those settings are wrong MOBO will cycle-boot. Do you know how to set these settings in this board?

Cycle boots can also be the result of wrong mem timings, PL Level, short on the MB backplate (check with a DMM touch the cascade backplate to find any shorts this is common using phase change backplates), or overheating PWM area...

What BIOS your on?