** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[coop]

Nice job fatguy. Looks like it was fun. On a thrashed out board no less. Congrats on your results.

[radaja]

Gigabyte UD3R with Q6600 @ 4.976GHz and 553FSB.

http://www.xtremesystems.org/forums/...50#post3926850

thats insane fatguy1992,cant wait to see how high you
get it on dice and ln2

[fatguy1992]

Nice job fatguy. Looks like it was fun. On a thrashed out board no less. Congrats on your results.

Thanks
Yeah it was heaps of fun, I kinda feel sorry for my UD3R, i'll be getting it fixed soon I hope.

thats insane fatguy1992,cant wait to see how high you
get it on dice and ln2

Thanks
I can't wait to try LN2 either

[cincyrob]

hey guys has anyone tried/have the GA-EP45-DS4P? looks like a nice board...

[derek0309hk]

hello, i am new to ud3p and also overclocking

i am now having q9650, ud3p, g-skill ddr2 8000 4gb pack(1000mhz)

so i copied a setting from this post

478 x 9
cpu clock drive 800mv
pci-e 900mv
cpu clock skew 0ps
mch 50ps

ram divider 1:1

vcore 1.35
term 1.26
pll 1.45
ref .868

mch 1.32
ref .838

i can pass IBT 5times and i am lazy to other tests until i got a setting that satisfies me

so i would like to ask if there is anything i can do to get higher fsb or lower voltage?

i tried to boot with 4.35ghz, 4.4ghz or even 4.5ghz

but even i add a lot voltage to those fsb, its still unstable, most of the time it says"a clock interrupt was not received on a secondary processor within the allocated time interval"bsod

my cpu has a vid 1.225

thanks a lot!

and one more thing i dont wish to add too much voltage to it like 1.4X v for its temp and also lifetime :P

someone help?

[kahuna321]

someone help?

when i find a combo that works i'll share it!

my vid is 1.1875

[chuck4456]

I have a brand new EP45-UD3R sitting right next to me.
Had a new - still sealed E8400 sitting on the shelf that no one wanted to buy from me so I figured that I may as well just pick up a board to run it on.
I'm going to try to put it all together tomorrow nite.

[derek0309hk]

when i find a combo that works i'll share it!

my vid is 1.1875

thanks a lot

btw when i thought i get my system at least half-stable last night that i passed 5 times ibt, i get a bsod when i was using firefox only, so the system is still unstable right?

[OC Nub]

I have a brand new EP45-UD3R sitting right next to me.
Had a new - still sealed E8400 sitting on the shelf that no one wanted to buy from me so I figured that I may as well just pick up a board to run it on.
I'm going to try to put it all together tomorrow nite.

Congrats, You will like this board.

[Hoss331]

thanks a lot

btw when i thought i get my system at least half-stable last night that i passed 5 times ibt, i get a bsod when i was using firefox only, so the system is still unstable right?

yes its unstable, use this template but enter your exact settings

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.5GHz............................[ 500 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 500      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 50ps    ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 266      ]
System Memory Multipler.........................[ 2.50A    ]
Memory Frequency 1066...........................[ 1250     ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5       ]
tRCD............................................[ 5       ]
tRP.............................................[ 5       ]
tRAS............................................[ 15      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ 3       ]
tWTR[3].........................................[ 3       ]
tWR[6]..........................................[ 6       ]
tRFC[54]........................................[ 54      ]
tRTP[3].........................................[ 3       ]
Command Rate (cmd)[0]...........................[ 2T      ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ 1200    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ 1200    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.15    ]...................[ 1.40625 ]
CPU Termination   [ 1.20    ]...................[ 1.300   ]
CPU PLL           [ 1.50    ]...................[ 1.500   ]
CPU Reference     [ 0.760   ]...................[ 0.848   ]
 
MCH Core          [ 1.100   ]...................[ 1.400   ]
MCH Reference     [ 0.760   ]...................[ 0.863   ]
MCH/DRAM Refernce [ 0.900   ]...................[ 0.970   ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.100   ]
 
DRAM Voltage      [ 1.800   ]...................[ 1.940   ]
DRAM Termination  [ 0.900   ]...................[ 0.970   ]
Channel A Ref     [ 0.900   ]...................[ 0.970   ]
Channel B Ref     [ 0.900   ]...................[ 0.970   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

[derek0309hk]

yes its unstable, use this template but enter your exact settings

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.3GHz............................[ 478 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 478      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 50ps    ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 333      ]
System Memory Multipler.........................[ 2.00B    ]
Memory Frequency 1066...........................[ 956     ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5       ]
tRCD............................................[ 5       ]
tRP.............................................[ 5       ]
tRAS............................................[ 15      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ 3       ]
tWTR[3].........................................[ 3       ]
tWR[6]..........................................[ 6       ]
tRFC[54]........................................[ 54      ]
tRTP[3].........................................[ 3       ]
Command Rate (cmd)[0]...........................[ 2T      ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 11       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.15    ]...................[ 1.35000 ]
CPU Termination   [ 1.20    ]...................[ 1.260   ]
CPU PLL           [ 1.50    ]...................[ 1.450   ]
CPU Reference     [ 0.760   ]...................[ 0.868   ]
 
MCH Core          [ 1.100   ]...................[ 1.320   ]
MCH Reference     [ 0.760   ]...................[ 0.838   ]
MCH/DRAM Refernce [ 0.900   ]...................[ Auto   ]
ICH I/O           [ 1.500   ]...................[ Auto   ]
ICH Core          [ 1.100   ]...................[ Auto   ]
 
DRAM Voltage      [ 1.800   ]...................[ 2.100  ]
DRAM Termination  [ 0.900   ]...................[ Auto   ]
Channel A Ref     [ 0.900   ]...................[ Auto   ]
Channel B Ref     [ 0.900   ]...................[ Auto   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

thanks!

[derek0309hk]

also, i am putting a watercooling on the cpu but the temp is bad

config :
d-tek fuzion v2
swiftech 360 radiator with 3 cooler master fan(the one that has blue led)
swiftech ddc 18w
gelid gc-2 thermal paste

the temp is about 40 when idle (3.00ghz , default, 1.18v)
50+ when load

42~44 when idle(4.3ghz, 1.35v in bios)
70~75 in ibt

i thought the config isnt that bad?

i have used the fuzion for 1 year but i have also opened it and found it is not dirty and nothing inside it is affecting the cooling

so what would be the cause?

the room temperature is about 28,29 i thought

[Hoss331]

try this,

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.35GHz...........................[ 483 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 483      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 0ps     ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 400      ]
System Memory Multipler.........................[ 2.00D    ]
Memory Frequency 1066...........................[ 966      ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5       ]
tRCD............................................[ 5       ]
tRP.............................................[ 5       ]
tRAS............................................[ 15      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ 3       ]
tWTR[3].........................................[ 3       ]
tWR[6]..........................................[ 6       ]
tRFC[54]........................................[ 54      ]
tRTP[3].........................................[ 3       ]
Command Rate (cmd)[0]...........................[ 2T      ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 9       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 9       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.15    ]...................[ 1.400   ]
CPU Termination   [ 1.20    ]...................[ 1.280   ]
CPU PLL           [ 1.50    ]...................[ 1.500   ]
CPU Reference     [ 0.760   ]...................[ 0.835   ]
 
MCH Core          [ 1.100   ]...................[ 1.320   ]
MCH Reference     [ 0.760   ]...................[ 0.850   ]
MCH/DRAM Refernce [ 0.900   ]...................[ Auto   ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.100   ]
 
DRAM Voltage      [ 1.800   ]...................[ 2.100  ]
DRAM Termination  [ 0.900   ]...................[ Auto   ]
Channel A Ref     [ 0.900   ]...................[ Auto   ]
Channel B Ref     [ 0.900   ]...................[ Auto   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

If your temps are getting that hot already use prime and not IBT.

[derek0309hk]

try this,

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.35GHz...........................[ 483 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 483      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 0ps     ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 400      ]
System Memory Multipler.........................[ 2.00D    ]
Memory Frequency 1066...........................[ 966      ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5       ]
tRCD............................................[ 5       ]
tRP.............................................[ 5       ]
tRAS............................................[ 15      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ 3       ]
tWTR[3].........................................[ 3       ]
tWR[6]..........................................[ 6       ]
tRFC[54]........................................[ 54      ]
tRTP[3].........................................[ 3       ]
Command Rate (cmd)[0]...........................[ 2T      ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 9       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 9       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.15    ]...................[ 1.400   ]
CPU Termination   [ 1.20    ]...................[ 1.280   ]
CPU PLL           [ 1.50    ]...................[ 1.500   ]
CPU Reference     [ 0.760   ]...................[ 0.835   ]
 
MCH Core          [ 1.100   ]...................[ 1.320   ]
MCH Reference     [ 0.760   ]...................[ 0.850   ]
MCH/DRAM Refernce [ 0.900   ]...................[ Auto   ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.100   ]
 
DRAM Voltage      [ 1.800   ]...................[ 2.100  ]
DRAM Termination  [ 0.900   ]...................[ Auto   ]
Channel A Ref     [ 0.900   ]...................[ Auto   ]
Channel B Ref     [ 0.900   ]...................[ Auto   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

really thanks for your help i gonna try this

any idea for the cooling problem?

cause a 360 rad plus fuzion v2 should be enough for 9650@ 4.3?

and i love to use ibt because it seems waste less time than prime

[Hoss331]

Id reseat the cpu block first.

[derek0309hk]

Id reseat the cpu block first.

have done it several times

hard to solve this problem

[cincyrob]

hey this may help me with my OC.first, how do you get the info you guys are posting of your bios? like derek0309hk has posted. maybe i can do that and post my settings and you more experenced guys can point me in the right direction on my GA-EP45-DS3R.

[bluestang]

i have a few PM's concerning how i go about overclocking DDR3 ram on my EP45T-UD3R?
it was Crucial value 2x2GB ram kit with Micron D9JNM IC's that i used, i found the ram clocks very well on the boards.
also, i saw friends of mine running Crucial value 3x1GB (that comes with Micron D9JNM IC's), they did overclocking the ram to DDR3-2100MHz+ (on the EP45T-UD3R's) with low volts like 1.86-1.92v.

my experience with the EP45T-UD3R, i used to try a few kits with Micron D9GTR and D9GTS IC's, they did not overclock very well at all on my board, even with high volts.
anyways, i'm sorry i could not be more help. as far as i can remember i did post my voltage settings, i'm not sure what can i do to help you more.

PangingIII,
Where exactly did you get the DDR3 Value RAM or what is the model number so I can get some?

My PC at work is on the fritz so I'm going to get a new sytem to build. I have to get my stuff from TigerDirect.com since we have an account withthem and they have a GA-EP45T-UD3LR that I am going to pick up. Along with it also either a E6300 (2.8), E8400 (3.0), Q9400 (2.66) or Q9550 (2.83) depends on budget allowed. Thanks!

[derek0309hk]

http://www.youtube.com/watch?v=aPpfa1U6wf0

could this be the cause of the cooling problem?

but i dont see bubbles in the tube which is pumping water in, but i do see bubbles in the tube which is pumping water out

i made sure the block is tight enough with its top, i also add plastic stick paper to the top and the block

why would there be bubbles then?

thanks

[nugzo]

Anybody heard anything concerning release date of the EP45-UD5? I'm in the tinkering mood again.... That should be a fun toy.. Have any review samples surfaced? An SLI Modded bios for the UD5 could convince me to keep this platform for another year! Or even some decent crossfire would be nice.

[nugzo]

http://www.youtube.com/watch?v=aPpfa1U6wf0

could this be the cause of the cooling problem?

but i dont see bubbles in the tube which is pumping water in, but i do see bubbles in the tube which is pumping water out

i made sure the block is tight enough with its top, i also add plastic stick paper to the top and the block

why would there be bubbles then?

thanks

That isn't enough bubbles to be worried about. My system has been producing way more bubbles than that for over 6 months and i've never had a cooling issue. i doubt you'd even see 1 degree temp drop without those small air bubbles.

[derek0309hk]

That isn't enough bubbles to be worried about. My system has been producing way more bubbles than that for over 6 months and i've never had a cooling issue. i doubt you'd even see 1 degree temp drop without those small air bubbles.

but i just cant figure out where the problem is

a swiftech 360 rad

3 cooler master fans

a swiftech ddc 18w pump

and a d-tek fuzion v2, should really be enough for a q9650 right?

i want to get better cooling effect so that i can raise the vcore

[nugzo]

what thermal compound are you using? Never mind i see. Remember, it doesn't take much. Also you may have a warped IHS or water block. Have you considered lapping them? Just for reference.. I'm using a similar water cooling setup. At idle with 1.39v 4400mhz i'm at 40-41c. Prime Small FFT 65-66c to start then reaches 70c. I've been running this setup for almost a year (9 months) 24/7 with no problems. Last night i ran a 3dmark06 50 loop at 1920x1200 8x AA and 8x AF. Took all night but it completed with a score of 16056 and max temp of 69c with real temp. I've never been able to run IBT like some others here, just too much heat. What are your temps with Prime95 Small FFT?

i made sure the block is tight enough with its top, i also add plastic stick paper to the top and the block

thanks

I dont understand what your talking about there, can you explain? plastic stick paper?

[derek0309hk]

what thermal compound are you using? Never mind i see. Remember, it doesn't take much. Also you may have a warped IHS or water block. Have you considered lapping them? Just for reference.. I'm using a similar water cooling setup. At idle with 1.39v 4400mhz i'm at 40-41c. Prime Small FFT 65-66c to start then reaches 70c. I've been running this setup for almost a year (9 months) 24/7 with no problems. Last night i ran a 3dmark06 50 loop at 1920x1200 8x AA and 8x AF. Took all night but it completed with a score of 16056 and max temp of 69c with real temp. I've never been able to run IBT like some others here, just too much heat. What are your temps with Prime95 Small FFT?



I dont understand what your talking about there, can you explain? plastic stick paper?

sorry for my bad english

that doesnt matter anyway, the bubbles seems not to be the cause

for now, my room temp should be 27~29

i am running 1.35v in bios for 4.2ghz

and running prime 95 too, 70~71 load for 4cores

idle should be 40~42

i measure the temp of the surrounding of the rad too

it is 35~36

so what i am thinking is, do the block have the ability to carry heat away?

i know fuzion v2 is a good block, but i have been using it for 1 year anyway i opened it too, it is clean.

i cant measure the temp of the coolant, so i measure the rad

i assume the temp of the cooland is about 4x, is this normal? when my cpu is running 70~71

i am thinking should i sell this fuzionv2 and get a ek extreme or extreme lt

[derek0309hk]

small correction

40~41 at idle, 68~70 at load