Results 1 to 25 of 7441

Thread: ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Threaded View

  1. 06-15-2009, 11:30 PM #10
    Loco23
    Loco23 is offline
    Registered User
    Join Date
    Mar 2009
    Location
    Moscow
    Posts
    46
    Quote Originally Posted by OC Nub View Post
    I don't know about the volts long term. I think 1.3625v is still the max according to Intel. I have heard some say 1.45v on the EO's. IDK but I wanted a 4.4-4.5ghz chip so if it has a short life I'm ok with it. As long as my temps are good its staying where it is.
    1.3625v - maximum VID for the E8190-E8600 processors. Maximum core and FSB Termination voltage is 1.45V. This is from Intel® Core™2 Duo Processor E8000¹ and E7000¹ Series Datasheet.
    I used my Q9450 about 4 months at 1.525V, he's still alive
    Keep temps below 80 or even below 75C.
    Last edited by Loco23; 06-15-2009 at 11:33 PM.
    MB: Gigabyte EP45-UD3P
    CPU: Q9650
    RAM: G.Skill 4GB Kit F2-8000CL5D-4GBPQ and 2x1GB Crucial (1200MHz/2.22v)
    PSU: Antec TPQ-850
    Storage: 2x250GB Seagate SATA (RAID1 on ICH10R), 200GB Seagate SATA, 320GB WD SATA, 4x147GB 15k Hitachi SAS (RAID5 on LSI MegaRAID SAS 8888ELP aka Intel SRCSASJV)
    Case: Cooler Master Stacker STC-T01 (with two 4-in-3 Device Module)
    VGA: Zotac GTX260^2 (216 core, ZT-X26E3KB-FSP)
    Liquid Cooling System:
    CPU: Enzotech Water Block SCW-1 Rev.A Sapphire
    Pump: Laing DDC-1T with top XSPC Laing DDC reservoir
    Radiator: XSPC RX480 + 4xZalman F3
    [SIGPIC][/SIGPIC]
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules