Quote Originally Posted by Arthur View Post
I can say one thing to you about your cpu temperatures. I do not know which equipments do you use with your system or loop but they are hot with your currently water cooling system. Because you do not give the 1.5 or 16vcore on it. It seems like 1.3-1.4vcore what you gave it. Your quad also 45nm, I cant think about 45nm if you have it LOL.

Cheers

Note: I do not know whats your room temperature normally.
I know that the temps are high but when I run LinX (max problem size, max memory use) it gets very hot @ ~1,35v, when I run P95 small temp drops by ~10C and I can drop vcore by ~0,10v.

Everyone that have run LinX (LinPack) with max problem size, max memory use knows that the CPU gets very hot even though the vcore is relative low.



Quote Originally Posted by ci2kla View Post
Looks to me like the NB GTL is a little too high...try back down a bit and seeif it helps. Also start testing with all CPU GTLs on normal (auto)
If I back down on NB GTL to lower then +70 Crysis wouldnīt run, it freeze and I have also tried CPU GTL from +50, auto, +50, auto to auto, -50, auto, -50 and seems that the system are most stable with auto, -40, auto, -40.

I can play games, web browsing, watch movie, encode, decode, run LinX, run P95 small FFT, loop 3DMark06 and Vantage for hours and other daily things without problems with the setup I have now but I are not stable with P95 blend.

So maybe I have to get into the black magic art of DRAM Skew but I donīt have a clue where to start.

Thank you for your input