Quote Originally Posted by shazza View Post
Those are still great temps. Tempted to get me one of those fancy 965s to compare it to my 920.

It's great to see that you are getting good temp control with the quad rad, especially since you've got the CPU and SLI GPUs on the same loop. Sounds very promising.
Shazza,
I used to enjoy tweaking all the settings but I found myself spending more time tweaking than using the PC. The 965 is easy to work with and it takes very little time. At 1.425 CPV-V I hit 4.5 easily today. I have seen where some have taken it to 5.4 on air but I am not Xtreme in that regard. I just like a nice stable OC. I am back down to 4.3 with idle temps of 39C, H20 temp of 27C and an ambient room temp of 25C. The GPU's idle at 35-36C with the factory setting of 720mhz. This is a hard system to stress.
Thanks for "forcing" me to buy the 285's!

Quote Originally Posted by SiGfever View Post
Rocky,

Those are excellent temps with a single loop D5 system at that OC. I look forward to see what you push that beast to.
Thanks John! I will push it this weekend but foe now I am just enjoying it. I did a little WWI flying today in OFF3 with all of the eye candy on and I was stunned! This thing is a beast.

Quote Originally Posted by skinnee View Post
Is that a photo you snapped? What time of year is that? Typically, the only clear nights like that are in the end of november/first of december, otherwise the fog and smog are too thick for good photos. We screwed up and waited to go up to the peak on the clearest night.

I told the wife I am not going again unless a DSLR is in my hands.



Nice temps! And to think you have a your i7, SLI'd 285's and a chipset on that loop...those are some damn good temps!

Feser is a tough company to deal with, I have been promised the moon and nothing to show for it. Had to rely on a friendly community member for the TFC360 I just finished testing. Ah well, not everyone can be the Easter Bunny.
Skinnee,
As noted below, I got that WP from another site. We have great cameras but I have no idea how to use them. My wife is the photo guru.
BTW, I took the chipset cooler out. I am cooling the two 285's and the i7 only. I am impressed with this Feser! I failed to mention that I am running the fans at 50% and I have no idea if these are good temps.
I do hope you can get your hands on one. I would love to see you put this animal to the test.

Quote Originally Posted by hotwaxisbad View Post
Nice background and computer! Is the 54*C load with HT on?

Here is the awesome background if anyone was looking for it. http://interfacelift.com/wallpaper_b...rk_knight.html
Yes, I have HT enabled. BTW, Interfacelift has some outstanding WP, especially in 25x16.
I almost forgot...my load temps are roughly 8-10C higher on the i7 when I turn the torch on. The 285's bump up about to a max of 46 & 44. I am really looking forward to OC'ing those pups!