Got my voltage down a bit and and modified my clocks to max out my new ram ( G.Skill PI 1100mhz). Actual core voltage under load is 1.338v DMM

Code:
******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 8        ]
Fine CPU Clock Ratio............................[ + 0    ]
CPU Frequency 4.35GHz............................[ 484 x 9  ]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 484     ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2 [Disabled] 
 
 
******Advanced Clock Control******

CPU Clock Drive..........................[700mV]
PCI Express Clock Drive................[700mV]
CPU Clock Skew..........................[0ps]
MCH Clock Skew..........................[0ps]

******DRAM Performance Control******
 
Performance Enhance.............................[ Standard    ]
MCH Frequency Latch.........................[ 333   ]
System Memory Multipler.........................[ 2.40B    ]
Memory Frequency 1066............................[ 1162      ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 5        ]
tRCD............................................[ 5        ]
tRP.............................................[ 5        ]
tRAS............................................[ 15      ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.25 ]...................[ 1.38125v    ]
CPU Termination   [ 1.20    ]...................[ 1.28v   ]
CPU PLL           [ 1.50    ]...................[ 1.45v    ]
CPU Reference     [ 0.760   ]...................[ .835v  ]
 
MCH Core          [ 1.100   ]...................[ 1.320v    ]
MCH Reference     [ 0.760   ]...................[ .850v   ]
MCH/DRAM Reference [ 0.900   ]...................[ auto  ]
ICH I/O           [ 1.500   ]...................[ auto   ]
ICH Core          [ 1.100   ]...................[ auto   ]

DRAM Voltage     [ 1.800v]...................[2.000v]
DRAM Termination [0.900v]...................[1.000v]
Channel A Reference [0.900v]................[1.000v]
Channel B Reference [0.900v]................[1.000v]