Hi Guys, I'm trying to get 3.6GHz stable and my 4th core failed Prime after 7:52hrs. I wasn't home to check then but when I stopped at 15:17hrs later, the other 3 cores were all fine. I'm going to lap my cpu in hopes of achieving lower temps. If you have any suggestions in the mean time that would help me get stable, it would greatly help. Thanks!
Temps:
load
0, 72
1, 69
2, 72
3, 69

idle
0, 49
1, 45
2, 49
3, 45
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Fast
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3.60GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400Mhz
PCI Express Frequency (Mhz) .........:Set to 100

C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 2.50A
Memory Frequency (Mhz) ..............: 1000MHz
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................ 5
tRCD ......................................... 5
tRP'........................................... 5
tRAS.......................................... 15

Advanced Timing Control
tRRD........................................... 4
tWTR.......................................... 4
tWR............................................ 6
tRFC........................................... 52
tRTP........................................... 3
Command Rate (CMD) ....................: 1

Driving Strength Profiles
Driving Strength ............................ 800MHz

Channel A
Static tRead Value.........................: 7
 tRD Phase0 Adjustment...................:Auto
 tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Channel B
Static tRead Value.........................: 7
 tRD Phase0 Adjustment...................:Auto
 tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................: 1.238V

CPU Termination…..... 1.200V*.......: 1.20V

CPU PLL…………………....1.500V*.......: 1.50V

CPU Referen.…………....0.755V*.......: 0.76V

CPU Reference2………,,0.800V*.......: Does not have this option

MCH/ICH
MCH Core…………….....1.100V...........: 1.24V
MCH Reference….…….0.800V...........; 0.76V
MCH/DRAM Ref.…......0.900V...........: 0.91V
ICH I/O……………….....1.550V............: 1.50V
ICH Core…………...……1.100V............: 1.10V

DRAM
DRAM Voltage ……....1.800V............: 2.0V
DRAM Termination .…0.900V............: 0.91V
Channel A Reference 0.900V............: 0.91V
Channel B Reference 0.900V............: 0.91V

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]
LLC Enabled