**Official DFI LanParty UT X48-T2R(and LT) Discussion

[zsamz_]

I have a UT X48 TR2, great board, worked great for me for ages. Decided to take the jump to Vista 64 and at the same time go from 4GB to 8GB of RAM. I bought 2 additional 2GB Sticks of the same RAM.

1st time I try to boot with 4 sticks it stops at C1 on the post, flashed to latest BIOS, it boots but plenty of Memory instability becomes apparent. Run Memtest as soon as it gets to the 3rd dimm 4-6Gb it stalls. Run a windows memory checking tool, same again. Did some mucking around and its not a dodgy stick, whatever is in dimms 2 and 4 gives errors, all sticks pass memtest when just 4GB installed.

Memory is PC6400 running at 400FSB and timings are set by spd, tried varying the voltage from 1.8 to 2.1, makes no diff, tried upping the NB to 1.3V, again no improvement.

Any ideas?

Thanks,

Inq

its verry possible 2-4 are deffective cause i can run 1250mhz with 4 stix
btw you gonna need 1.45-1.6v on nb to run 4 stix


Shiranui Gen-An use 333/800 divider 1,6-1.65v nb
my board on vacation in a nice box