Quote Originally Posted by gyasih View Post
Jor3lBR-memtest passed just fine after 23 tries, i put my setting in the template below. Anything in parenthesis is what I manually put into settings.. OS still won't install.

Try This for starter (you had loads of settings way off including some mem timings):

Code:
MB Intelligent Tweaker(M.I.T.) 
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio ...........................: 9
CPU Frequency............................: 3.00GHz

Clock Chip Control                   
Standard Clock Control                   
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) .............: (316)
PCI Express Frequency (Mhz) .........:(100) 
C.I.A.2 ..................................:[Disabled] 

Advanced Clock Control 
CPU Clock Drive...........................: 900mV** 
PCI Express Clock Drive.................: 900mV**
CPU Clock Skew (ps)....................:  0ps
MCH Clock Skew (ps)....................: 50ps**

DRAM Performance Control 
Performance Enhance...................:( [STANDARD] )
(G)MCH Frequency Latch...............: [Auto] 
System Memory Multiplier ...............: (2.66 D) 
Memory Frequency (Mhz) ..............: 800*.......843
DRAM Timing Selectable .................: [Auto]**
 
Standard Timing Control 
CAS Latency Time........................5*......(a)
tRCD .........................................5*......(a)
tRP'...........................................5*......(a)
tRAS........................................15*......(a)

Advanced Timing Control 
tRRD........... auto
tWTR..........a
tWR............a
tRFC............a
tRTP............a

Channel A Settings
Static Tread.............a
..............................a
..............................a
..............................a
..............................a
Trd2rd.....................a
Twr2wr....................a
Twr2rd.....................a
Trd2wr......................a


Motherboard Voltage Control
Load-Line Calibration.....................: Enabled (disabled)
CPU Vcore….……….......1.325*...: (1.4)
CPU Termination…..... 1.200V*.......: (1.200)**
CPU PLL…………………....1.500V*.......: (Normal) **
CPU Reference.……….....0.76V*.......: (0.760)**

MCH/ICH MCH Core….1.100V*...........: (1.300)**
MCH Reference….…….0.76V*.............: (0.800)**
MCH/DRAM Ref.…......0.900V*...........: Auto
ICH I/O……………….....1.50V..............: Normal**
ICH Core…………...……1.100V..............: Normal**

DRAM DRAM Voltage …1.800V*............: (Auto)**
DRAM Termination ..…0.900V*.............: (Auto)**
Channel A Reference 0.900V*.............: (Auto)**
Channel B Reference 0.900V*.............: (Auto)**

Advanced Settings 
Limit CPUID Max. to 3.....................: [Disabled] 
No-Execute Memory Protect............: [Enabled]** 
CPU Enhanced Halt (C1E)................: [Disabled] 
C2/C2E State Support....................: not present
x C4/C4E State Support..................: not present
CPU Thermal Monitor 2(TM2) ...........: [Disabled] 
CPU EIST Function.........................: [Disabled] 
Virtualization Technology................: [Disabled]