Quote Originally Posted by OC Nub View Post
The q9650 I have runs very warm even at stock vid 1.2125v, idle 38c to 40c mid 50's loaded out small fft's. Have tried 3 different HS's a TT120 first then 2 different Ultra120 Extremes, ordered a couple Scythe 133cfm. fans with the same basic results. The 120 does help when loaded out, better than the TT120. Also put the same chip in the other case on a different ud3p with similar temps, even tried a different PSU. I am still shooting for 4.25ghz for 24/7 use. My question is if I am able to get the fsb I need but with a lower multi, is it just a matter of vcore at that point to get it stable with a higher multi? Should I then leave the reference voltages alone? I know the memory is good where it is, so running small fft's trying to get the cpu stable at 473fsb. Will run Prime blend for a final test. At 4.25 ITB would at my temps so that probably isn't an option.
Thanks
that makes two of us (1.2 vid).

i was beginning to think twice about the stature of my lapped true lol... although i just now applied some IC Diamond 7 and its helped a bit.