INFRNL,here you go.hope it helps.
Code:******************************************************* MB Intelligent Tweaker(M.I.T.) ******************************************************* Robust Graphics Booster ..............: Auto CPU Clock Ratio ......................: 8.5x CPU Frequency ........................: 4.30GHz (506x8.5) ************** Clock Chip Control ************** >>>>>> Standard Clock Control CPU Host Clock Control................: Enabled CPU Host Frequency (Mhz) .............: 506 PCI Express Frequency (Mhz) ..........: 100 C.I.A.2 ..............................: Disabled >>>>>> Advanced Clock Control.........: [Press Enter] CPU Clock Drive.......................: 1000mV PCI Express Clock Drive...............: 1000mV CPU Clock Skew (ps)...................: 0ps MCH Clock Skew (ps)...................: 50ps *********** DRAM Performance Control *********** Performance Enhance...................: Turbo (G)MCH Frequency Latch................: 266 System Memory Multiplier .............: 2.50A Memory Frequency (Mhz) ...............: 1265 DRAM Timing Selectable ...............: Manual >>>>>> Standard Timing Control CAS Latency Time......................: 5 tRCD .................................: 5 tRP...................................: 5 tRAS..................................: 15 >>>>>> Advanced Timing Control........: [Press Enter] tRRD..................................: Auto tWTR..................................: Auto tWR...................................: Auto tRFC..................................: 55 tRTP..................................: Auto Command Rate (CMD) ...................:Auto >>>>>> Channel A Timing Settings......: [Press Enter] Static tRead Value....................: 8 tRD Phase0 Adjustment.................:Auto tRD Phase1 Adjustment.................:Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel A Driving Settings.....: [Press Enter] Driving Strength Profile..............: Auto Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto >>>>>> Channel B Timing Settings......: [Press Enter] Static tRead Value....................: 8 tRD Phase0 Adjustment.................: Auto tRD Phase1 Adjustment.................: Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel B Driving Settings.....: [Press Enter] Driving Strength Profile..............: Auto Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto ********* Motherboard Voltage Control ********* Voltage Types...........Normal..........Current ----------------------------------------------- >>>>>> CPU Load-Line Calibration.................: Disabled CPU Vcore..............1.31250v.......: 1.418V CPU Termination........1.200v.........: 1.38V CPU PLL................1.500v.........: 1.57V CPU Reference..........0.780v.........: 0.899 >>>>>> MCH/ICH MCH Core...............1.100v.........: 1.420V MCH Reference..........0.800v.........: 0.914 MCH/DRAM Ref...........0.900v.........: Normal ICH I/O................1.500v.........: Normal ICH Core...............1.100v.........: Normal >>>>>> DRAM DRAM Voltage...........1.800v.........: 2.1600V DRAM Termination.......0.900v.........: Normal Channel A Reference....0.900v.........: Normal Channel B Reference....0.900v.........: Normal
Reply With Quote
Bookmarks