Quote Originally Posted by eva2000 View Post
when you get 88 code, power down board (power button), switch off psu from psu switch... wait 1-2 mins. Then turn on psu, and while holding HOME key on keyboard, hit power switch to turn on rig (you'll be booting at default 133blck while all other bios timings/voltages remain same as your last bootable settings unless you did a clear cmos).

88 only occurs when you overclock way too far or if your vcore/cpu vtt/vdimm balance isn't correctly set or if you try a border line max bclk value ... i only ever had this code around 5 times in over several months now as i always use memtest86+ before loading windows.
When you say code you mean the mobo will power on but nothing happens and code 88 is clearly visible no flashing or anything?

Also, in the manual it says "secondary RTC reset" any idea what is it?