Murdermod Zeus style

[alpha1ma]

awsome..rads..

[N19h7m4r3]

this build is looking VERY nice, kinda makes me wish i was doing my build in a tj07 the radiators look very nice indeed, i think i might spray mine in the same way

any 1 got any idea where to get a hammond box in the uk??

very nice build, cant wait to see more!

exe!

Maplin's should have them.

[exemay]

thanks, i found them on maplins, orderd 6 of them, thanks!! cant wait to put my build together!

[N19h7m4r3]

Enjoy them m8, they're amazingly usefull

[Zeus]

Update!

Got some good news and some bad news.

Got the PSU in today and what a handsome bastard it is.







The only downside is that it was DOA! It makes a strange clicking sound, the psu fan doesn't even start and it supplies only 9V for 12V and 3.25V for 5V. RMA time and it does postpone my build even more.

I started leaktesting the bottompart before closing things up and it was all watertight!



Orb watchers sit tight, here's two thermochills in SLI!



crowded house







Shiny huh?





Gonna put the fans on the rads now and stick the rads to the boxes.

Thanks for watching.

[Zeus]

Gonna put the fans on the rads now and stick the rads to the boxes.

Done:

[BlueAqua]

That looks really clean Zeus. Nice work.

[theseeker]

Sorry to hear about your PSU, but your work is top notch! That is going to be a heavy rig.

[Oli4v]

very clean man and nice sleevingjob

[dualbrain]

Wow - impressive Radiator-Setup! Looks very good and technically well executed! The lower section is already close to perfection from design-perspective (well sleeved too!). Sry for your PSU though.

[SNiiPE_DoGG]

looks hot Zeus

just to clarify, you are running the water through the 2fan then the 3-fan correct?

[Zeus]

That looks really clean Zeus. Nice work.

Thanks BA, i hope my work can get somewhere close to yours but that will be hard work.

Sorry to hear about your PSU, but your work is top notch! That is going to be a heavy rig.

Thanks, yes, it's heavy alraedy, lol.

very clean man and nice sleevingjob

Thanks man.

Wow - impressive Radiator-Setup! Looks very good and technically well executed! The lower section is already close to perfection from design-perspective (well sleeved too!). Sry for your PSU though.

Thanks, it means a lot coming from you. The PSU is a real bummer, to make matters worse, i bought it in Germany so i'm gonna have to send it back to Germany too. Bad luck is my middle name you know.

looks hot Zeus

just to clarify, you are running the water through the 2fan then the 3-fan correct?

Thanks Snipe. Actually it runs from the pump into the PA120.3 and through the SLI connection into the PA120.2.

[SNiiPE_DoGG]

Thanks Snipe. Actually it runs from the pump into the PA120.3 and through the SLI connection into the PA120.2.

you should reverse it to achieve the highest air-water delta at each point in the radiators, here's a diagram to explain why. (let me know if you need any clarification)

[Zeus]

I think you're onto something! I'll check if i can reverse the hoses with it still looking good. Thanks for the tip.

[Darkninja462]

Sorry Bout your PSU mate, I'm loving the build going to follow it to the end.

This is tracking back a bit but, How did you drill the 24pin and 8pin power supply holes in the motherboard tray ? some advice doing it would be very useful as I'm fed up of seeing them hanging there lo.

Ninja

[dualbrain]

Where did you get the PSU? I just want to avoid to get yours

[exemay]

Your Build is looking amazing, keep the work up!! i cant wait to see the final product

Question to Snipe DoGG

you should reverse it to achieve the highest air-water delta at each point in the radiators, here's a diagram to explain why. (let me know if you need any clarification)

If your setting up the radiators with 6 fans, where should they go?? either side? all 6 in the middle of the radaitors??? or 3 in the middle and 3 on the outside?

[SNiiPE_DoGG]

I would do 3 in pull and 3 in the middle in a 6 fan config IIRC putting fans directly next to each other isn't really a good idea unless they are counter rotating.

[exemay]

i didnt think sandwiching fans was a good idea... its a real shame that most cases dont have the room for a decent thick radiator like the thermochills or feser with room for 3 rows of fans........how effective is it if you have fans either side of the rad's??

[SNiiPE_DoGG]

My system works great with just one set of 3 sanaces in the middle and 25mm spacer housings on the push side of the fan. I dont think you need as many fans as you are thinking of using

if you see in my worklog my load temps are sub 50C with my proc running 1.408v @ 4230mhz

[Zeus]

Sorry Bout your PSU mate, I'm loving the build going to follow it to the end.

This is tracking back a bit but, How did you drill the 24pin and 8pin power supply holes in the motherboard tray ? some advice doing it would be very useful as I'm fed up of seeing them hanging there lo.

Ninja

I just drilled holes with a stepped drill and used a dremel to cut out the metal in between the holes.

Where did you get the PSU? I just want to avoid to get yours

www.preiscompany.de

Your Build is looking amazing, keep the work up!! i cant wait to see the final product

Neither can i but it's postponed by the darn PSU now. Oh well...

[Darkninja462]

I just drilled holes with a stepped drill and used a dremel to cut out the metal in between the holes.

Is there anyway to do it while the tray is still in case ?

[Zeus]

Well, that would make it very hard. I wouldn´t recommend as the shavings will end up all over your precious hardware--not good.

[Darkninja462]

Well, that would make it very hard. I wouldn´t recommend as the shavings will end up all over your precious hardware--not good.

Ahh very true will proberly take everything out then.

Thanks for the advice much appreciated.

Ninja

[N19h7m4r3]

Very nice looking.

I love the dual rad setup, for a moment it looked liked the fans wouldn't fit at all

Pity about the PSU

I usually order from http://www.kmelektronik.de/ and they've been great to me.