** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[fatguy1992]

Heres my top overclock, still lots of room to go higher

http://www.youtube.com/watch?v=pbmJtRkSlak

Look at the temps at the end

[Jor3lBR]

Heres my top overclock, still lots of room to go higher

http://www.youtube.com/watch?v=pbmJtRkSlak

Look at the temps at the end

Lol fatguy nice benching! Whats the brand of your Phase?

I still need to hook my boards to my Cryo-Z, but with some gueto mods on a Domino ALC I was able to bring home the SuperPi 1m and 32m World Records:

[fatguy1992]

It hasn't really got a brand, Kayl built it from me

Also nice work

[coop]

Indeed, congrats Jor3lBR . Glad to see the records here in the desert.
The other night I installed 4x1 dimms, 2 Crucial and 2 KHX. Both 8500's. Ran a 32m pi then after some adjusting got it to run P95 for awhile. On my way to 4.5
[IMG][/IMG]

[nugzo]

Lol fatguy nice benching! Whats the brand of your Phase?

I still need to hook my boards to my Cryo-Z, but with some gueto mods on a Domino ALC I was able to bring home the SuperPi 1m and 32m World Records:

Awesome Job! Whats up with CPU-Z, it says EP45-UD3P on one screen but says EP45-Extreme on the other.? Also What Ram are you using?

[WhiteFireDragon]

wow Jor3lBR, that's very impressive. are you using the gskill pc9600 memory? these seem to be the only 4gb 24/7 stable for 1200+

[bobreece]

well i have installed my rma board and its still buzzing when under load mainly under blend or large ffts it goes nuts. how many of you guys have this same problem? and is it fixed with revioson 1.1?

[fatguy1992]

I kinda had the buzzing noise, not very loud tho. I can't hear if it still happens, lol my phase change is too loud

[bobreece]

anyone else would aprreciate finding out if this is on all/ most boards or just the unlucky one?

[mark0326]

Lots of very happy users here... very few complaints.

[fatguy1992]

anyone else would aprreciate finding out if this is on all/ most boards or just the unlucky one?

Sorry I haven't been following eveything thats been happening. But did u try updating the BOIS, also I think the noise i get goes away when I disable LLC.

Sorry if i just suggest things that u have tried, but like i said i haven't really been following whats been happening.

[bobreece]

can you guys just run blend and take a listen please guys.

i think the board is the best but wish i never had this buzzing never happened on 2 of the ddr3 versions

[fatguy1992]

If/when I get mine 2 start again i'll stress it and have a listen.

[Touche]

No buzzing at all on my UD3R, but I don't use DES or LLC.

[Jor3lBR]

Awesome Job! Whats up with CPU-Z, it says EP45-UD3P on one screen but says EP45-Extreme on the other.? Also What Ram are you using?

Hey Nugzo! Thanks. One screen shot you picked it up from my sig that was on the UD3P, but as you can see here: http://www.xtremesystems.org/forums/...d.php?t=217439 I have both.

They clock the same I guess I just got less volts for the Extreme then the UD3P, probably because I learned some new tricks.

I was running my system on 4900Mhz 24/7 with low volts for those benches and wPrime, 3DMarks, Super Pi32m stable (couldn't Prime95 too much heat) I had a $61 CollIT Domino WC system for it lol! I'll try that on the UD3P also pretty sure they can do same because UD3P has better chipset revision (A3).

Yes I still using the G.Skill PI 9600 4Gb kit, they run comfortably above 1310Mhz with little 2.1-2.2 vdimm.

wow Jor3lBR, that's very impressive. are you using the gskill pc9600 memory? these seem to be the only 4gb 24/7 stable for 1200+

I'm using the G.Skill PI 9600 4Gb kit, they run comfortably above 1310Mhz with little 2.1-2.2 vdimm.

I can run HCI Memtest all day with them above 1300Mhz.

Indeed, congrats Jor3lBR . Glad to see the records here in the desert.
The other night I installed 4x1 dimms, 2 Crucial and 2 KHX. Both 8500's. Ran a 32m pi then after some adjusting got it to run P95 for awhile. On my way to 4.5

Thanks mate! Keep pushing you will get there soon enough!

It hasn't really got a brand, Kayl built it from me

Also nice work

Thanks how are you liking it? Yeah custom builds are always better! I would like to see the build log of your phase, is there any?

[bobreece]

i only use llc can you guys who dont use llc try it and let me know if it buzzes

[Loony]

loony,ive used 8 gigs of G.skill pc8800's 4x2gig running 1:1 overclocked at 8.5x518 and using quad 9650 and it works great.with my E8500 i was able to run 1:1 with 8x545 pretty stable.
http://www.xtremesystems.org/forums/...postcount=1270

Awesome, thanks for the good news.

Has anyone used and overclocked DDR2 800's with any success?

[OC Nub]

Has anyone else noticed any issues with ET6 and comp. freezing? I do a prime run for 16 hours, surf the web, watch videos, chat or whatever. All the normal things I do with no issues. Am ready to quit prime and take a ss, forget to open ET6 to show my voltages. Open ET6 and bam it freezes. Have had a major problem with freezing on this board but always had ET6 open. This is a screen shot of the run about 30 seconds before opening ET6 and the freeze. ASUS AI suite had similar effects so I stopped using it. Was hoping this would be better. Never used ET6 to adjust voltages, just as a reference for Oc ss's.

[bobreece]

could a bad power supply cause my buzzing on my board?

[fatguy1992]

Thanks how are you liking it? Yeah custom builds are always better! I would like to see the build log of your phase, is there any?

I'm loving my phase change cooler. Its so awesome. There isn't a build log, probably cause he didn't have time and since hes build quite a lot of SS units it wasn't anything to special.

Also have a look at what I got before with my Q6600.

http://valid.canardpc.com/show_oc.php?id=506194

My basic settings are.

LLC: Enabled
Vcore: 1.5875v - drops to 1.552v in Windows
PLL: 1.57v
VTT: 1.3v
CPU Reference: 0.863
MCH: 1.3v
MCH Reference: 0.863
ICH: 1.2v

Idle temp = -43C

[ohsnapsjay08]

this is great info. is this the F7 bios? thanks!

J

Heres my template for a Q6600 on a UD3P.

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9 
CPU Frequency .........................: 3.6GHz (400X9)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 400 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: Default
PCI Express Clock Drive................: Default
CPU Clock Skew (ps)....................: 0ps 
MCH Clock Skew (ps)....................: 0ps 

DRAM Performance Control

Performance Enhance....................: Standard
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 400MHz 
System Memory Multiplier ..............: 2.0D 
Memory Frequency (Mhz) ................: 800MHz

DRAM Timing Selectable ................:  

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto.  

Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled] 
CPU Vcore..............................: 1.45
CPU Termination........................: 1.3V
CPU PLL................................: 1.50V
CPU Reference..........................: 0.823 to 0.863 

MCH/ICH

MCH Core...............................: 1.2V  
Reference..........................: 0.823 to 0.863
MCH/DRAM Ref...........................: 1.0v
ICH I/O................................: 1.5V 
ICH Core...............................: 1.100V 

DRAM
DRAM Voltage...........................: 2.0v
DRAM Termination ......................: 1.0v 
Channel A Reference....................: 1.0v
Channel B Reference ...................: 1.0v

Let me know if that works.

[radaja]

OC nub,make sure ET6 is not set to load any settings.cause that would cause it for sure.

[nugzo]

i only use llc can you guys who dont use llc try it and let me know if it buzzes

Why dont you disable LLC and see? or listen......

[Navigator1]

...hmmm ...i think i need water or dyce to kick the worldrekord

But my 4,85Ghz are on air

[fatguy1992]

this is great info. is this the F7 bios? thanks!

J

Sorry I only just saw ur post and no thats on the F4 BIOS