Originally Posted by
pangingIII
okay, if you want to do that, then increase your CPU core volts, try 1.3375v in bios, and with the exact setting (you can help both of us save time by first using the same setting until you get a enough stable system that you want). and retest your system in Windows and post back.
then later on i'll probably help you change a few things in this overclock's setting.
also recheck the "MCH Reference..........................: 0.740v",
i'm just noticing now, that i forgot about this setting and didn't tell you the complete info.
0.740v is the value of the CPU Termination (VTT)........................: 1.20V"
when you increase the VTT the MCH Reference will also increase in value.
please note that, as much as i want to help you, but i'm too lazy, this due to it takes too much time and effort for me to write (and read) in english, so that, there will a time when i simply won't continue to help you.
i hope you will understand.
@ PangingIII,
Thank you for your help. Here is my status so far. Right now I seem to be stable at 4.05GHz. My settings are below. I did some more research and I couldn't find a definit answer on LLC, so I enabled it. Also, I bumped up the vCore to 1.33750v. It was stable in Windows but when I would restart I would get an overclocking error in the BIOS and I would have to reset the settings.
I bumped up the volts and I don't seem to have any issues. Let me know what you think and if there is anything else I should change.
Thank you again for your help.
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .......................: 9
Fine CPU Clock Ratio...................: 0.0
CPU Frequency .........................: 4.05 GHz (450X9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 450
PCI Express Frequency (Mhz) ...........: Auto
C.I.A.2 ...............................: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 700mV
PCI Express Clock Drive................: 700mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps
DRAM Performance Control
Performance Enhance....................: [Turbo]
Extreme Memory Profile (X.M.P.)........: [Auto]
(G)MCH Frequency Latch.................: [333MHz]
System Memory Multiplier ..............: 2.4B
Memory Frequency (Mhz) ................: 1080
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15
Advanced Timing Control
tRRD...................................: 4
tWTR...................................: 4
tWR....................................: 12
tRFC...................................: 68
tRTP...................................: 4
Command Rate (CMD) ....................: Auto
Driving Strength Profiles
Driving Strength ......................: Auto
Channel A
Static tRead Value.....................: [AUTO]
tRD Phase0 Adjustment..................: [AUTO]
tRD Phase1 Adjustment..................: [AUTO]
tRD Phase2 Adjustment .................: [AUTO]
tRD Phase3 Adjustment..................: [AUTO]
Trd2rd(Different Rank).................: [AUTO]
Twr2wr(Different Rank).................: [AUTO]
Twr2rd(Different Rank).................: [AUTO]
Trd2wr(Same/Diff Rank).................: [AUTO]
Dimm1 Clock Skew Control...............: [AUTO]
Dimm2 Clock Skew Control...............: [AUTO]
DDR Write Training.....................: [AUTO]
Channel B
Static tRead Value.....................: [AUTO]
tRD Phase0 Adjustment..................: 0 [AUTO]
tRD Phase1 Adjustment..................: 0 [AUTO]
tRD Phase2 Adjustment .................: 0 [AUTO]
tRD Phase3 Adjustment..................: 0 [AUTO]
Trd2rd(Different Rank).................: [AUTO]
Twr2wr(Different Rank).................: [AUTO]
Twr2rd(Different Rank).................: [AUTO]
Trd2wr(Same/Diff Rank).................: [AUTO]
Dimm1 Clock Skew Control...............: [AUTO]
Dimm2 Clock Skew Control...............: [AUTO]
DDR Write Training.....................: [AUTO]
Motherboard Voltage Control
CPU
Load-Line Calibration..................: [Enabled]
CPU Vcore..............................: 1.33750v
CPU Termination........................: 1.26V
CPU PLL................................: 1.50V
CPU Reference..........................: [AUTO]
MCH/ICH
MCH Core...............................: 1.26V
MCH Reference..........................: 0.740v
MCH/DRAM Ref...........................: [AUTO]
ICH I/O................................: 1.500V
ICH Core...............................: 1.100V
DRAM
DRAM Voltage...........................: 1.9v
DRAM Termination ......................: [AUTO]
Channel A Reference....................: [AUTO]
Channel B Reference ...................: [AUTO]
Reply With Quote
Bookmarks