F4L and F4N have my multi locked up at 22 on my 940, whether or not I have turbo on.

I absolutely cannot get past 180 mhz bclck, even up to vcore of 1.525 ...other voltages I have taken up to (and a bit past) settings I have seen others have here and in the i7 overclock thread. I dont know if I havent already hurt this cpu, or if it is the bios, or why the reason is that I am locked in at 22x.

It feels like I cant get the qpi over ~3300 but without being able to change the multi its hard to tell. I need a x30 qpi setting. Running qpivtt up to 1.535 and qpipll up to 1.3 did not do anything to stabilize it (at 181 bclck).

So I am stuck at 4140 MHz...without HT, b/c even running that I cannot get it stable at up to 1.525 vcore

I think I found my 24/7 clock, lower than I wanted, but hey can't have everything :P Have to do the memory settings next.

180 x 22 Turbo ON (so x23 or 4140 mHz)
QPI x36
Uncore x13 (12 seems unstable)
Mem x6
Vcore 1.4875 (any lower BSOD during linx)
QPI/VTT 1.34 (see vdimm)
CPUpll 1.88
QPIpll 1.24
IOH Core 1.4
ICH I/O 1.58
ICH Core 1.22
Vdimm 1.8 (older ddr3 ram)

No screenies, but with the high vcore there is nothing new to spam the thread with Temps are at about 80C under load (linx) and 70-75C(prime), with vcore 1.456 load. LLC and turbo are on, HT is OFF. Cooling is a true black 120 (lapped) with a scythe ultra kaze 3000 zip tied to it.

At 1.525 vcore I still cannot turn HT on or go to 181 bclck (even turning turbo off), and Load temps are in the 90C range.

Note on raid: get a separate controller card. Intel/mobo raid is free, and you get what you pay for. I have had no good experiences using built in raid. Just my $.02