Quote Originally Posted by Kensek View Post
http://www.keepandshare.com/doc/view.php?id=923548&da=y

The above link is to Bios version 0901, dated 11/20/2008 for the Rampage Extreme.

Flash at your own risk. Use the EZ-Flash Method to minimize a bad flash occurring.

Also there is No Change Log.

Please Post your likes and dislikes about this version.

Thank you
Thank you Kensek


@ ALN688, shame about the Noctuas clashing, but all looking very good.


Quote Originally Posted by cheapseats View Post
Blah blah.......At some point below 450FSB - maybe at 400 and below but haven't tested yet - the 1:2 divider appears to allow the tRD value to be two lower than CL value. As cstkl1 showed a few posts back tRD 5 can be used with CL7. I suppose the 1:2/CL7/tRD5 combination is allowed by the lower FSB level.
An update to this - it's actually the 200 strap, not FSB level, that seems to allow tRD values to be two lower than CL value (1:2 divider only tested so far).

Between (at least) 400-500FSB, tRD 6 is available with CL8 on 200 strap (but not on 266 or 333 straps). Similarly tRD 5 ok with CL7 up to......

Not sure yet about performance - no noticable effect in Everest or 32M for 200 strap over 266 or 333 straps, despite being able to use lower tRD values.

Does some other (hidden?) timing run looser when using the 200 strap ?

Just working through this really - any thoughts guys ?