running 4X1GB here too at the mo.Originally Posted by cstkl1
for me, the PC would hang after sometime of use until i set the cpu/nb skews and the mem clk skews.
admittedly, i'm not going for any huge overclocks though. i just wanted some stable 24/7 settings (with no lockups) so i'd have something to fall back on when oc'ing
for now, i'm running 500x8, mem at 1600 7-6-5-15-1N. i've passed 12hrs of memtest and had no probs gaming etc.
[edit] just flashed to 0901. not seeing any obvious differences, i just booted with same settings.Code:AI OVERCLOCK TUNER =========================MANUAL OC FROM CPU LEVEL ==========================AUTO OC FROM MEMORY LEVEL UP ====================AUTO FSB FREQUENCY ==============================500 CPU RATIO SETTING ==========================08 CPU CLOCK SKEW =============================300ps NB CLOCK SKEW ==============================300ps FSB STRAP TO NORTH BRIDGE ==================333 PCIE FREQUENCY =============================100 DRAM FREQUENCY =============================1600 DRAM COMAND RATE ===========================1N DRAM TIMING CONTROL ========================MANUAL CAS LATENCY ================================7 RAS TO CAS DELAY ===========================6 RAS PRE TIME ===============================5 RAS ACT TIME ===============================15 RAS TO RAS DELAY ===========================AUTO REF CYCLE TIME =============================72 WRITE RECOVERY TIME ========================AUTO READ TO PRE TIME ===========================AUTO READ TO WRITE DELAY S/D ====================AUTO WRITE TO READ DELAY S ======================AUTO WRITE TO READ DELAY D ======================AUTO READ TO READ DELAY S =======================AUTO READ TO READ DELAY D =======================AUTO WRITE TO WRITE DELAY S =====================AUTO WRITE TO WRITE DELAY D =====================AUTO WRITE TO PRE DELAY =========================22 READ TO PRE DELAY ==========================5 PRE TO PRE DELAY ===========================AUTO ALL PRE TO ACT DELAY =======================AUTO ALL PRE TO REF DELAY =======================AUTO DRAM STATIC READ CONTROL ===================DISABLED DRAM DYNAMIC WRITE CONTROL =================DISABLED DRAM SKEW CONTROL DRAM CMD SKEW ON CHANNEL A = AUTO DRAM CLK SKEW ON DIMM A1 = NORMAL DRAM CLK SKEW ON DIMM A2 = NORMAL DRAM CTL SKEW ON DIMM A1 = AUTO DRAM CTL SKEW ON DIMM A2 = AUTO DRAM CMD SKEW ON CHANNEL B = AUTO DRAM CLK SKEW ON DIMM B1 = DELAY 75ps DRAM CLK SKEW ON DIMM B2 = DELAY 75ps DRAM CTL SKEW ON DIMM B1 = AUTO DRAM CTL SKEW ON DIMM B2 = AUTO AI CLOCK TWISTER ===========================MODERATE AI TRANSACTION BOOSTER =====================MANUAL PERFORMANCE LEVEL ==========================08 PULL-IN OF CHA PH1 =========================DISABLED PULL-IN OF CHA PH2 =========================ENABLED PULL-IN OF CHA PH3 =========================DISABLED PULL-IN OF CHA PH4 =========================DISABLED PULL-IN OF CHA PH5 =========================ENABLED PULL-IN OF CHB PH1 =========================DISABLED PULL-IN OF CHB PH2 =========================DISABLED PULL-IN OF CHB PH3 =========================DISABLED PULL-IN OF CHB PH4 =========================DISABLED PULL-IN OF CHB PH5 =========================DISABLED EPU II PHASE CONTROL =======================AUTO CPU VOLTAGE ================================1.350 V LOAD-LINE CALIBRATION ======================DISABLED CPU PLL VOLTAGE ===========================1.56406 V FSB TERMINATION VOLTAGE ===================1.25916 V CPU GTLVREF 0 ==============================AUTO CPU GTLVREF 1 ==============================AUTO CPU GTLVREF 2 ==============================AUTO CPU GTLVREF 3 ==============================AUTO NB GTLVREF =================================AUTO NORTH BRIDGE VOLTAGE =======================1.48447 V DRAM VOLTAGE ===============================1.84231 V NB DDRVREF =================================AUTO DDR3 CHANNEL A VREF ========================AUTO DDR3 CHANNEL B VREF ========================AUTO SOUTH BRIDGE 1.5 VOLTAGE ===================AUTO SOUTH BRIDGE 1.05 VOLTAGE ==================AUTO CPU SPREAD SPRECTRUM =======================DISABLED PCIE SPREAD SPECTRUM =======================DISABLED
Reply With Quote
Bookmarks